DiyLightAnimation

Hardware => Lynx EtherDongle => Lynx Conductor => Topic started by: sabie on November 12, 2012, 08:45:31 pm

Title: conductor time will not sync found the problem and fixed lors3 related
Post by: sabie on November 12, 2012, 08:45:31 pm: <rtt..so far
i have rechecked all solder joints
reflashed conductor twice
still no better see attached control panel screen shot

found the problem
if light o rama listener is running on pc the conductor will not accept the sync time command
if you unload the listener the conductor responds fine to sync time command
Title: Re: conductor time will not sync
Post by: JonB256 on November 12, 2012, 09:01:11 pm: Possible running a Mac with Windows on it?
What kind of PC is it?
Title: Re: conductor time will not sync
Post by: sabie on November 12, 2012, 09:04:00 pm: windows 7 8 core processor
not the problem the other conductor i built the sync function works fine
Title: Re: conductor time will not sync
Post by: RJ on November 12, 2012, 09:09:37 pm: Password issue is my guess, anythng else you would not be getting the info you are.

RJ
Title: Re: conductor time will not sync
Post by: JonB256 on November 12, 2012, 09:09:41 pm: Is the battery in correctly and have good volts?
Title: Re: conductor time will not sync
Post by: sabie on November 12, 2012, 09:55:32 pm: swapped battery with other conductor no change

used the cf card from working one
password was the same for the card
Title: Re: conductor time will not sync
Post by: rrowan on November 12, 2012, 10:15:59 pm: is this on the board that you mod?

Rick R.
Title: Re: conductor time will not sync
Post by: dcwehw99 on November 12, 2012, 10:29:09 pm: The Conductor status looks good. As RJ said it looks like a password problem.

To confirm this can you "Disable Schedule"? IF not then it's a password issue.

Denny
Title: Re: conductor time will not sync
Post by: sabie on November 12, 2012, 10:34:29 pm: no mods on board i will setup a new cf card and see if it makes it any better
Title: Re: conductor time will not sync
Post by: rrowan on November 12, 2012, 10:43:31 pm: just curious since you did mod the board as per this post http://diylightanimation.com/index.php?topic=10104.0

Rick R.
Title: Re: conductor time will not sync
Post by: sabie on November 13, 2012, 06:47:37 am: I have 2 conductors 1 is standard 1 is modified the one i'm having trouble with was not modified
Title: Re: conductor time will not sync
Post by: rrowan on November 13, 2012, 07:06:01 am: You are not allowed to view links. Register or Login
I have 2 conductors 1 is standard 1 is modified the one i'm having trouble with was not modified

Ok, my bad

I would reflow the solder joints on the rtc board then, both on the sides of the header pins.

Rick R.
Title: Re: conductor time will not sync
Post by: sabie on November 13, 2012, 06:09:07 pm: new today will let me disable schedule and set volume
sync time does cause it to flash red updating time but time does not change on conductor
reflowed all solder joints i could access without removing board
on conductor and rtc board
Title: Re: conductor time will not sync help needed
Post by: sabie on November 15, 2012, 07:03:39 pm: any thoughts
Title: Re: conductor time will not sync help needed
Post by: sabie on November 15, 2012, 08:04:45 pm: found the problem
if light o rama listener is running on pc the conductor will not accept the sync time command
if you unload the listener the conductor responds fine to sync time command
Title: Re: conductor time will not sync found the problem and fixed lors3 related
Post by: RJ on November 15, 2012, 08:55:55 pm: Very Interesting!

RJ
Title: Re: conductor time will not sync found the problem and fixed lors3 related
Post by: sabie on November 15, 2012, 09:05:17 pm: i though so but i duplicated it 3 times to verify
Title: Re: conductor time will not sync found the problem and fixed lors3 related
Post by: JonB256 on November 15, 2012, 10:54:11 pm: Monitoring with Wire Shark - if the LOR Listener is running, it is FLOODING the system with Multicast packets for every connected universe.