DiyLightAnimation

Hardware => Lynx EtherDongle => Lynx Conductor => Topic started by: Kasey911 on July 02, 2013, 06:10:45 pm

Title: EtherDongle coop question
Post by: Kasey911 on July 02, 2013, 06:10:45 pm

I see folks ordering a kit #2 option, but I don't see anything in the coop post for a second option.  Am I missing something?

Title: Re: EtherDongle coop question
Post by: rdebolt on July 02, 2013, 06:12:48 pm

The #2 kit has the case with the conductor cut outs. Kit #1 has the case with just the ETD cut outs.

Pasted from the top of the COOP Page:


Kit 1 - Etherdongle with Case that has Etherdongle cutouts.
Kit 2 - Etherdongle with Case that has Etherdongle and Conductor cutouts.

Title: Re: EtherDongle coop question
Post by: chrisatpsu on July 02, 2013, 11:58:39 pm

Even if you're not adding a conductor now, but eventually plan on adding one, you should choose option #2


kit#1 has three holes cut out.

ethernet rj45 in,
pixelnet rj45 out
and power



kit#2 has extra holes cut into the case for people planning on adding the conductor.
ethernet rj45 in,
pixelnet rj45 out
and power
plus...
for the memory card, and audio (someone can correct me if there are more holes.

Title: Re: EtherDongle coop question
Post by: rdebolt on July 03, 2013, 12:03:24 am

You are not allowed to view links. Register or Login

Even if you're not adding a conductor now, but eventually plan on adding one, you should choose option #2

Totally agree here!

Title: Re: EtherDongle coop question
Post by: tstewart on July 03, 2013, 01:10:00 pm

Kit 2 is not a done deal yet.  The company does not have drawings for the conductor cutouts so I have to work with them to see about getting it done.  I also have to see how much cost it adds.


Todd



Sent from my Galaxy Nexus using Tapatalk 2

Title: Re: EtherDongle coop question
Post by: Kasey911 on July 03, 2013, 02:32:44 pm

Ok, that's just strange.  When viewing the post from Tapatalk, the updated option for Kit 2 didn't show up.  Sorry for the stupid question.  I can see the option when logged in via the computer. 

Title: Re: EtherDongle coop question
Post by: rdebolt on July 03, 2013, 03:08:34 pm

You are not allowed to view links. Register or Login

Kit 2 is not a done deal yet.  The company does not have drawings for the conductor cutouts so I have to work with them to see about getting it done.  I also have to see how much cost it adds.


Todd

What do you mean! Cost is no object! GET IT DONE!  >:D LOL Just kidding. I was going to say that, but am hoping that you are able to get it done reasonably! Thanks for running the coop Todd!

Title: Re: Re: EtherDongle coop question
Post by: tstewart on July 03, 2013, 05:21:37 pm

Interesting.  On my phone using Tapatalk it shows up fine.


Todd

You are not allowed to view links. Register or Login

Ok, that's just strange.  When viewing the post from Tapatalk, the updated option for Kit 2 didn't show up.  Sorry for the stupid question.  I can see the option when logged in via the computer.

Sent from my Galaxy Nexus using Tapatalk 2