DiyLightAnimation

Store => Finished COOPS => Topic started by: n1ist on August 14, 2013, 03:14:42 pm

Title: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on August 14, 2013, 03:14:42 pm: DMX Servo Controller

Please read this post completely before participating in this Coop.

For any information on any of this equipment please refer to the proper forum and ask your questions there to keep this coop forum clean and easy to follow.

This coop will have two items to offer. The manual, bom, etc, may be found in the WIKI (http://diylightanimation.com/wiki/index.php?title=Equipment).

This project is is described here (http://diylightanimation.com/index.php?topic=4835.0).

Item 1 - DMX Servo Controller kit with PCB

This kit includes the PCB and all components. It does NOT include a case or wireless module (it optionally uses a standard Lynx EX/RX module). The PIC will NOT be programmed; you will need a pickit2, pickit3, or equivalent programmer to program the PIC.
In 50-piece quantities, the cost will be $21

Item 2 - Bare DMX Servo Controller PCB

This is just the PCB for the servo controller; order it if you want extra spare boards.
In 50-piece quantities, the cost will be $3.40

Pricing includes PayPal 3% and Coop 3% fees. As always, higher numbers reduce pricing and lower numbers increase pricing. Change your order as you wish during the ordering portion of the Coop, but please make sure I can tell what you are changing. Please check the order list that follows to make sure I don't miss your order or any changes as the Coop continues.

The coop will run until August 30th at 8:00 pm E.S.T. or until we hit 100 kits.

US shipping will be in regular USPS flat rate boxes. Many units will fit in a small box.

By joining this Coop you also agree that the Coop manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Coop at your own risk.

As with any Coop this Coop is subject to the forum rules. These rules can be reviewed using the following link:Forum Coop rules (http://diylightanimation.com/index.php?topic=111.0)

Post in this thread the number you want. You will get a pm when the coop closes letting you know how to pay for your coop items.

Thank you for your participation in this coop.

/mike
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: n1ist on August 14, 2013, 03:15:14 pm: Code: You are not allowed to view links. Register or Login
Name Servo KiPCB Paid Sent gforman 2 0 X X tmcteer 1 0 X X Voltorb 4 0 X X arw01 2 0 X X blaha 2 0 X X Danbe 1 1 X X solidmod 4 0 X X cpnbnana 2 0 X X spudman7 1 2 X X lorajosl 2 0 X X sbaron 2 2 X X rayster 2 0 X X TMB 2 0 X X caretake 2 0 X X mmccrae 2 2 X X drlucas 2 0 X X lboucher 1 0 X X supergum 2 5 X X typoagai 1 2 X X monkey14 2 5 X X AaronS 2 4 X X Creative 2 3 X X JoeFromO 2 0 X X Sly 2 2 X X dilgod 3 0 X X Rev. Noc 12 14 X X smeighan 2 0 X X elmo2res 3 2 X X edwinpee 1 0 X X Night Ow 2 0 X X Ozmin 5 5 X X urthegma 3 0 X X bmannc 2 0 X X rdebolt 4 4 X X davron12 4 25 X X Justtazz 2 0 X X isellgum 6 2 X X mr2hogs 2 0 X X loverofl 2 0 X X maffeirw 4 4 X X trekster 3 3 X X pk 2 0 X X Segull 1 1 X X MazdaFan 3 0 X X jess_her 1 3 X X Rich Ren 1 0 X X remixsam 1 0 X X Total 116 91
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: gforman on August 14, 2013, 03:18:54 pm: Please put me down for

2 of Kit 1

thank you

Glen
Title: Bobcat Servo Controller COOP [OPEN]
Post by: tmcteer on August 14, 2013, 03:25:37 pm: 1 kit #1

Thanks

Tom
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Voltorb on August 14, 2013, 03:44:32 pm: Qty 4 of Kit #1 Please.

Thank you!
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: arw01 on August 14, 2013, 04:11:36 pm: 2 of Kit 1 please

Could someone pm me a link from the threads of what we can do with these modules?
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: blaha on August 14, 2013, 04:16:48 pm: 2 of Kit 1 please

Thanks!
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Danbe on August 14, 2013, 04:20:38 pm: 2 Kit 2
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: solidmodeler on August 14, 2013, 04:22:35 pm: 4- kit # 1, please
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Danbe on August 14, 2013, 04:24:33 pm: You are not allowed to view links. Register or Login
2 Kit 2

Sorry
1 kit 1
1 kit 2
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: cpnbnanamn on August 14, 2013, 04:26:16 pm: 2 - kit #1, please.

-Roger
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: spudman78 on August 14, 2013, 04:35:35 pm: I would like:

1 of kit #1

and

2 of kit #2

Thank You,

Kevin
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: lorajoslyn on August 14, 2013, 04:46:51 pm: 2 of Kit #1

Thank you!
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: sbaron on August 14, 2013, 05:43:14 pm: 2 - Kit #1
2 - Kit #2

Thanks
Steve
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: rayster on August 14, 2013, 06:00:27 pm: 2 of Kit#1

Thank You,

Ray
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: TMB on August 14, 2013, 06:06:01 pm: 2 of kit #1 please

Thanks!

TMB
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: caretaker on August 14, 2013, 06:09:03 pm: Two of Kit 1 please!

Thanks for doing this coop.
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: mmccrae on August 14, 2013, 07:00:24 pm: 2 - Kit #1
2 - Kit #2

Thank you,
Mike
Title: Bobcat Servo Controller COOP [OPEN]
Post by: drlucas on August 14, 2013, 07:20:21 pm: 2 of kit 1
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: lboucher on August 14, 2013, 07:54:30 pm: 1 of kit 1 please
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: supergumby on August 14, 2013, 08:14:36 pm: I'll take:

2 of Kit 1
5 of Kit 2

/Don
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: typoagain on August 14, 2013, 08:25:51 pm: 1 of #1 and
2 of #2 please

Thank you!
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: monkey141 on August 14, 2013, 08:42:50 pm: Thanks for running this Coop.

May I please order:

Kit #1 - 2

Kit #2 - 5

Thanks,
Mike
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: AaronS on August 14, 2013, 09:34:53 pm: 2 of kit 1
4 of kit 2

Thanks
AaronS
Title: Bobcat Servo Controller COOP [OPEN]
Post by: Creativehues on August 14, 2013, 09:48:42 pm: (2) kit#1
(3) kit#2

Thanks!

- John
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: JoeFromOzarks on August 14, 2013, 10:03:55 pm: Qty 2 of (Item 1 - DMX Servo Controller kit with PCB) please!

Thank you very much!!

:) joe
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Sly on August 14, 2013, 10:34:18 pm: Please put me down for

2-Kit#1
2-Kit#2

Thanks
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: dilgod on August 14, 2013, 11:09:32 pm: Please put me down for 3 of Kit #1.
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Rev. Noch on August 14, 2013, 11:32:28 pm: I would like six of kit one and six of kit two for me personally. I'll check with the other Colorado haunters and see if any of them would like to get in on this also.
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: smeighan on August 14, 2013, 11:39:23 pm: i would two of kit#1

thanks
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: elmo2resc on August 15, 2013, 12:10:47 am: 3 of Kit #1
2 of Kit #2

Thanks, Jerome
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: edwinpeek on August 15, 2013, 12:53:55 am: qty 1 of kit 1 please
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: remixsam on August 15, 2013, 01:15:16 am: 1of kit1
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Night Owl on August 15, 2013, 01:44:58 am: Two of kit #1 please.

Thank you so much for running this!
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Ozmin on August 15, 2013, 05:10:37 am: Please put me down for:

5 of Kit #1
5 of Kit #2

Thanks - Bill A.
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: urthegman on August 15, 2013, 07:42:42 am: 3 of kit #1 for me. And a thank you to you.
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: bmannc on August 15, 2013, 10:46:30 am: i would like 2 of kit 1 please and thanks for running this coop .....does anyone know how many servos each unit will control ?
barry
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: n1ist on August 15, 2013, 11:24:44 am: More info on the Bobcat servo controller can be found here (http://diylightanimation.com/index.php?topic=4835.0).

Feature List:

Fully Programmable (channel assignments, end-point adjustments, reversing, etc)
8 Servo Channels
8 LED Channels
Scaled End-Point Adjustments (256 discreet steps)
Servo Reversing
Resettable Fuse Protection For Each Servo
DMX Daisy Chaining (output = pass-through or re-broadcast)
Ex/Rx Wireless Ready
Single or Split Power Supply Input Option (logic circuitry / servo power)(single Pwr: 6v, Dual Pwr: 6v for logic, 4.8v - 6v for servos)
Adjustable LED Output Current (3mA - 120mA, requires resistor change)
Multiple Servos Can Be "Ganged" on Same DMX Channel
Low Power Lockout (fail-safe shutdown with indication on inadequate power supply)
RGB node control (requires 3 DMX/LED output channels per node - need common-anode RGB)
DMX Data Reception Indicator (LED blinks when DMX data is present)

/mike
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Rev. Noch on August 15, 2013, 11:51:43 am: I hope that this is ok, I've heard from a few of the other CO. Haunters. It looks like one or two more are still interested beyond this. Can you update my totals to these?

9 of Kit 1
8 of Kit 2
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Rev. Noch on August 15, 2013, 12:13:08 pm: Scratch that, I heard from another. Make the total:
10 of kit 1
10 of kit 2
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Rev. Noch on August 15, 2013, 01:08:21 pm: Sorry for the redundant posts, I'm not sure if I can edit one or not.

Make the current total
11 Kit 1
12 Kit 2
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: rdebolt on August 15, 2013, 02:09:13 pm: I would like 4 of kit 1 please! Thanks for running this COOP!
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: davron12 on August 15, 2013, 03:03:51 pm: 4 - Kit #1
25 - Kit #2
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Justtazz on August 15, 2013, 03:12:02 pm: 2 of kit #1 Please

Thank You,

Justin
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: rdebolt on August 15, 2013, 05:53:50 pm: Please add 4 of kit # 2 to my order please. So my total should be 4 of each kit. Thanks!

Roger
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: isellgum on August 15, 2013, 10:20:01 pm: Qty 6 of Kit #1
Qty 2 of Kit #2

Thanks
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: mr2hogs on August 15, 2013, 11:57:25 pm: 2 of Kit 1 please

Thanks
Title: Bobcat Servo Controller COOP [OPEN]
Post by: loveroflife96 on August 16, 2013, 12:01:00 am: I will take two of kit #1. Thanks!
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: maffeirw on August 16, 2013, 01:40:14 am: Please put me down for:

Kit #1 full kit - (4)
Kit #2 PCB only - (4)

Thanks
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: trekster on August 16, 2013, 09:18:05 am: 3 - Kit #1
3 - Kit #2

Please and Thank You

Ron
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: pk on August 16, 2013, 09:56:32 am: I would like 2 of kit # 1.

Thank you.

pk
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Segull on August 16, 2013, 02:01:58 pm: 1 of Kit#1
1 of Kit#2

Thank you for doing coop.
Joe
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: MazdaFan on August 16, 2013, 05:05:40 pm: 3 of Kit #1, please

Thanks so much for running this co-op.

Jamie
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: jess_her on August 16, 2013, 11:27:31 pm: Hello Mike

1 kit 1
3 kit 2

thank for doing this

Jess
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Rev. Noch on August 17, 2013, 01:09:06 am: Ok, another person requested in on this. Total for me:
12 of kit 1
14 kit 2
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: Rich Renn on August 17, 2013, 07:15:18 am: 1 of kit 1 please

Thanks
Richard
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: n1ist on August 17, 2013, 05:04:22 pm: When I wasn't looking, we blew thru the 100-unit count. I will be closing the COOP tomorrow (Sunday 8/18) at 8PM EDT. Please get any last-minute orders and changes in by then,

I have updated the list in the second post; please check it and let me know if I made any errors with your quantities.

/mike
Title: Re: Bobcat Servo Controller COOP [OPEN]
Post by: n1ist on August 18, 2013, 08:35:06 pm: The COOP is now closed. Please check the second post to make sure your totals are correct.
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: remixsam on August 21, 2013, 12:08:32 am: The second post is updated?

If so, I don't see my request on there....
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on August 21, 2013, 07:18:28 am: I have added your order; sorry for missing it.
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: loveroflife96 on August 21, 2013, 12:31:29 pm: Also, do not see my order on the 2nd post. My request is on the 4th page of the string. Requesting 2 kit #1.

Thanks...Duane
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on August 21, 2013, 01:05:24 pm: You're there, 9'th up from the bottom...
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on August 21, 2013, 01:08:27 pm: Status, as of 8/21

Done:
- Close coop.
- Got quote for parts.
- Got quote for PCBs.
- Sent PMs for payment

To do:
- Order flat-rate boxes from post office.
- Wait for payment.
- Order parts.
- Order PCBs
- Sort parts
- Package
- Ship
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: Voltorb on August 21, 2013, 01:53:29 pm: Payment sent. Thanks for running the Coop!
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: pk on August 21, 2013, 02:11:43 pm: Payment sent.

Thanks for running this coop
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: loveroflife96 on August 21, 2013, 02:14:06 pm: You are not allowed to view links. Register or Login
You're there, 9'th up from the bottom...
/mike

Sorry...was viewing on my phone and didn't see the scroll bar apparently. Payment has been sent. Thanks for running this coop!

Duane
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: rdebolt on August 21, 2013, 02:20:42 pm: Payment sent! Thanks Mike for running this!!!
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: Segull on August 21, 2013, 05:40:54 pm: Payment sent.
Thank you for doing coop.

Joe
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: tmcteer on August 21, 2013, 07:16:36 pm: Payment sent

Thanks Mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: caretaker on August 21, 2013, 08:08:22 pm: Payment sent,
Thanks for doing the coop!
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: dilgod on August 21, 2013, 11:04:35 pm: Payment sent.
Thanks once again, Michael.
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: arw01 on August 22, 2013, 02:04:20 am: payment sent
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: Rich Renn on August 22, 2013, 06:14:31 am: payment sent

Richard
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: MazdaFan on August 22, 2013, 04:28:50 pm: Payment sent.

Thanks again for running this co-op.

Jamie
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: elmo2resc on August 23, 2013, 04:40:15 pm: Money sent

Thanks, Jerome
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on August 26, 2013, 07:06:41 am: 6 left to pay. Please get your payments in ASAP. Thanks.

Status, as of 8/26

Done:
- Close coop.
- Got quote for parts.
- Got quote for PCBs.
- Sent PMs for payment
- Element14 order placed

To do:
- Order flat-rate boxes from post office.
- Wait for payment.
- Order parts.
- Order PCBs
- Sort parts
- Package
- Ship
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: davron12 on August 26, 2013, 10:47:21 am: Payment sent
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on August 29, 2013, 03:29:16 pm: Two left to pay.
PCBs have been ordered.

Status, as of 8/29

Done:
- Close coop.
- Got quote for parts.
- Got quote for PCBs.
- Sent PMs for payment
- Element14 order received
- PCB order placed

To do:
- Order flat-rate boxes from post office.
- Wait for payment.
- Order parts.
- Sort parts
- Package
- Ship

/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on September 06, 2013, 01:17:17 pm: All have paid. Thanks.
PCBs have shipped from China
I have started sorting the parts that have arrived.

Status, as of 9/6:

Done:
- Close coop.
- Got quote for parts.
- Got quote for PCBs.
- Sent PMs for payment
- Element14 order received
- PCB order placed
- Payments received
- Mouser order placed

To do:
- Order flat-rate boxes from post office.
- Sort parts
- Package
- Ship

/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on September 16, 2013, 09:31:54 am: The remaining parts have arrived. Now to get back to sorting...

Status, as of 9/16:

Done:
- Close coop.
- Got quote for parts.
- Got quote for PCBs.
- Sent PMs for payment
- Payments received
- Element14 order received
- PCB order received
- Mouser order received
- Ordered flat-rate boxes from post office.

To do:

- Sort parts
- Package
- Ship

/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: Rich Renn on September 16, 2013, 05:20:21 pm: Thanks for the update and running this coop

Richard
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on September 20, 2013, 11:16:50 pm: Passives are all sorted. Now to start on the semis
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on September 23, 2013, 11:30:23 am: About 3/4 done on the semis. Still waiting on a package of shipping boxes; I have one pack ready to start, and I just picked up a roll of packing tape, so I will start shipping things this week.

Status, as of 9/23:

Done:
- Close coop.
- Got quote for parts.
- Got quote for PCBs.
- Sent PMs for payment
- Payments received
- Element14 order received
- PCB order received
- Mouser order received
- Ordered flat-rate boxes from post office.

To do:

- Sort parts
- Package
- Ship
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on September 26, 2013, 09:21:46 pm: Sorting is all done; first batch ships tomorrow...
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: drlucas on September 26, 2013, 09:36:52 pm: .....wooooot woooot!!! I'm happier than a camel on Wednesday!!!!!!!!!!!!

You are not allowed to view links. Register or Login
Sorting is all done; first batch ships tomorrow...
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on September 28, 2013, 09:21:54 pm: Another 19 are packed and ready to go out Monday. That just leaves 4 that I need addresses on and two for Canada that I have to take to the post office next week. Then I will finally get the dining room table back for its regularly scheduled use...

/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on September 29, 2013, 07:48:53 pm: Two of the missing addresses came in, so it's 21 boxes going out tomorrow...
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: bmannc on September 30, 2013, 10:48:35 am: pm sent
thanks
bmannc
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: trekster on September 30, 2013, 09:23:01 pm: Mine arrived in Blanchard Oklahoma today. Thank you sir!

;D ;D ;D

Ron
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: gforman on September 30, 2013, 10:49:16 pm: Mine arrived in Los Banos today

thanks again for running this, a top class job

Glen
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: pk on October 01, 2013, 09:48:41 am: mine arrived yesterday in Denver
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: rdebolt on October 01, 2013, 09:56:30 am: Mine arrived yesterday! Thanks!!!!
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: drlucas on October 01, 2013, 07:53:38 pm: Hopefully CamelPost (err Canada Post) will deliver mine before Halloween.
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: maffeirw on October 02, 2013, 01:02:15 pm: Got them yesterday. Thanks again for all the work you put into this coop. Great job.
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: MazdaFan on October 02, 2013, 02:10:35 pm: They arrived today. Thanks!

Jamie
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: arw01 on October 02, 2013, 07:20:29 pm: Mine arrived today as well. Any gotchas in assembly for newbies?
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: jess_her on October 03, 2013, 02:41:00 am: Thank you Mike Great job, Jess
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on October 03, 2013, 08:02:35 am: Two assembly notes:
- The plastic mounting pegs for the RJ45 connectors can be a bit tight in the holes. I had to shave a little plastic off the inner edges of the pegs for an easy fit. An x-acto knife or a little hit with a file will do it.
- The electolytic caps have their leads spaced 0.1" apart. The holes in the board are 0.2" apart. When you insert the cap in the board, bend the leads to fit or have the caps sit about 1/4" above the board. It won't affect performance at all.
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: rdebolt on October 03, 2013, 09:43:49 am: Thanks for the note Mike!
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: rayster on October 03, 2013, 11:21:41 am: Received mine in sunny Los Angeles yesterday. Thank you for the great coop. :)

Ray
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: Rich Renn on October 03, 2013, 03:13:53 pm: Mine Arrived Today thanks for running the coop

Richard
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on October 03, 2013, 07:50:19 pm: All have been shipped. If anyone is missing anything, please drop me a pm and I'll take care of it.
/mike
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: drlucas on October 03, 2013, 08:48:23 pm: thanks! did USPS give a tracking number for the Canadian order? Normally it takes about 10 business days to arrive...i'll keep an eye out though for the delivery. thanks again for running the coop !
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: elmo2resc on October 05, 2013, 09:50:40 am: Mine arrived a few days ago. Thanks, Jerome
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: drlucas on October 08, 2013, 07:42:13 pm: Just arrived!! Thanks for running the coop. now the fun begins :)
Title: Re: Bobcat Servo Controller COOP [Closed for orders]
Post by: n1ist on October 09, 2013, 10:14:36 pm: I missed the question on tracking numbers to Canada. According to USPS, both orders were delivered on the 8th.
/mike