DiyLightAnimation

Hardware => Lynx SSR4 => Topic started by: lashbyrn on October 09, 2013, 03:11:56 pm

Title: help with varying wire colors
Post by: lashbyrn on October 09, 2013, 03:11:56 pm

I am showing my "amaturity" (I know not a word) here.  Wiki manual for Smart string controller v4 shows 3 pin watertight connector wires as red, blue green. My wires are blue, brown, yellow with green stripe.  Can any one tell me the substitution colors?  >.d9

Thanks

LA

Title: Re: help with varying wire colors
Post by: jnealand on October 09, 2013, 03:14:16 pm

There is a big post in the wiki with pictures and everything showing the correct color changes.

Title: Re: help with varying wire colors
Post by: mms on October 09, 2013, 03:19:19 pm

The blue, brown, yellow/green colors are what's used primarily in Australia and other parts of the world.  The wiki has a good explanation:

http://www.diylightanimation.com/wiki/index.php?title=3_Conductor

Title: Re: help with varying wire colors
Post by: lashbyrn on October 09, 2013, 03:25:54 pm

Thanks....Found it.  Teach a man to fish...

Title: Re: help with varying wire colors
Post by: jnealand on October 09, 2013, 03:27:42 pm

I'm curious though.  The SSR4 is an AC dimmer so how are you using these connectors which are normally used only for smart strings / pixelnet?

Title: Re: help with varying wire colors
Post by: scharbon on October 09, 2013, 03:32:38 pm

You are not allowed to view links. Register or Login

I'm curious though.  The SSR4 is an AC dimmer so how are you using these connectors which are normally used only for smart strings / pixelnet?

Jim, I think SSR4 and SSC look a lot a like to new people. Probably just posted in the wrong area.  OP actually references SSC V4 in his message

steve

Title: Re: help with varying wire colors
Post by: lashbyrn on October 09, 2013, 03:48:21 pm

I goofed and posted in wrong area.   Thanks for being able to read my mind though.