DiyLightAnimation

Hardware => Lynx EtherDongle => Lynx Conductor => Topic started by: thestig on October 14, 2013, 05:39:12 pm

Title: Help With Flash Card Socket Reflow
Post by: thestig on October 14, 2013, 05:39:12 pm

I just built my conductor that I had in the box from the first coop. I didn't notice until now that there has been issues with the card reader not being soldered correctly to the board. After troubleshooting for a bit I have realized that almost all of my pins move freely from the circuit board and the whole unit probably needs to be reflowed. These things are tiny and I know better than to attemp this myself as I struggle enough with some of the pins that are twice this size and not as close together. Can someone help me if I send it to them?

Thanks,

Grant.

Title: Re: Help With Flash Card Socket Reflow
Post by: RJ on October 14, 2013, 05:50:00 pm

PM me and we will get you fixed up.

RJ

Title: Re: Help With Flash Card Socket Reflow
Post by: keitha43 on October 14, 2013, 07:04:39 pm

You are not allowed to view links. Register or Login

I just built my conductor that I had in the box from the first coop. I didn't notice until now that there has been issues with the card reader not being soldered correctly to the board. After troubleshooting for a bit I have realized that almost all of my pins move freely from the circuit board and the whole unit probably needs to be reflowed. These things are tiny and I know better than to attemp this myself as I struggle enough with some of the pins that are twice this size and not as close together. Can someone help me if I send it to them?

Thanks,

Grant.

Once you get it going you are going to love the conductor!