DiyLightAnimation

Hardware => Lynx EtherDongle => Lynx Conductor => Topic started by: sittinguphigh on October 28, 2013, 02:35:16 am

Title: Android app remote
Post by: sittinguphigh on October 28, 2013, 02:35:16 am

Does android app only connection go threw your home router or can you remote from any were?

Can you change the conductor MP3 to mono?

Title: Re: Android app remote
Post by: RJ on October 28, 2013, 10:48:59 am

The App has not been updated to work with the new version of the conductor. the firmware had major changes to it that need to be match up in the app. The wifi in your phone can connect to the wireless unit on the Conductor directly this is how I used mine.

The conductor does not care if you use one or two channels of the audio.

RJ

Title: Re: Android app remote
Post by: sittinguphigh on October 28, 2013, 05:49:35 pm

So this is a new conductor software?
The hard ware is the same?

Stereo would sound funny out of one channel only.
I talk to some one from kicker company said that you can wire the MP3 to mono or stereo.
Is this true?

Title: Re: Android app remote
Post by: tbone321 on October 28, 2013, 05:56:55 pm

If you use audacity, you can convert the stereo MP3 file to mono.  This is what I suggest that you do.  Then you can connect to either output of the conductor and hear the same thing.

Title: Re: Android app remote
Post by: sittinguphigh on October 28, 2013, 06:05:55 pm

OK. That helps. Makes it simple.
I should be able to spit the mp3 line into the amp.