DiyLightAnimation

Hardware => Panther DMX Player => Topic started by: twooly on February 04, 2014, 10:10:39 am

Title: Setup Troubles
Post by: twooly on February 04, 2014, 10:10:39 am

Thought I had everything going, the player went through my seq just fine but stopped after the first run even though I have it setup to 0 in the control.txt file.  So I pulled the card out and looking at the card contents there is a file errors.txt and it contained the following.

Code: You are not allowed to view links. Register or Login

MSS: LIGHTSPR.SEQMSS: LIGHTSPR.SEQMTS: TRIGGER2.SEQ
MTS: TRIGGER3.SEQ
MTS: TRIGGER4.SEQ
MTS: TRIGGER5.SEQ
MTS: TRIGGER6.SEQ
MTS: TRIGGER7.SEQ
MTS: TRIGGER8.SEQ
MTS: TRIGGER9.SEQ
MTS: TRIGGERA.SEQ
MTS: TRIGGERB.SEQ
MTS: TRIGGERC.SEQ
MTS: TRIGGERD.SEQ
MTS: TRIGGERE.SEQ
MSS: LIGHTSPR.SEQMTS: TRIGGER2.SEQ
MTS: TRIGGER3.SEQ
MTS: TRIGGER4.SEQ
MTS: TRIGGER5.SEQ
MTS: TRIGGER6.SEQ
MTS: TRIGGER7.SEQ
MTS: TRIGGER8.SEQ
MTS: TRIGGER9.SEQ
MTS: TRIGGERA.SEQ
MTS: TRIGGERB.SEQ
MTS: TRIGGERC.SEQ
MTS: TRIGGERD.SEQ
MTS: TRIGGERE.SEQ
MSS: LIGHTSPR.SEQMTS: TRIGGER2.SEQ
MTS: TRIGGER3.SEQ
MTS: TRIGGER4.SEQ
MTS: TRIGGER5.SEQ
MTS: TRIGGER6.SEQ
MTS: TRIGGER7.SEQ
MTS: TRIGGER8.SEQ
MTS: TRIGGER9.SEQ
MTS: TRIGGERA.SEQ
MTS: TRIGGERB.SEQ
MTS: TRIGGERC.SEQ
MTS: TRIGGERD.SEQ
MTS: TRIGGERE.SEQ

I'm not using triggers and not sure where its pulling all the names from

my control.txt

Code: You are not allowed to view links. Register or Login

0,0,0,0,
my show.txt

Code: You are not allowed to view links. Register or Login

LIGHTSPR
my trigger.txt (Only put it in there to get the player to work, I don't really need it)
TRIGGER0

Then I have my LIGHTSPR.SEQ and TRIGGER0.SEQ

Any tips/ideas.

Thanks

Title: Re: Setup Troubles
Post by: TexasStingray on February 04, 2014, 01:48:16 pm

Does the SHOW.TXT file have a new line st the end. The triggers.txt file is required even if you do not use them.

Did the show work with the SD Card when you first got it. It had a set of test sequences on it.

Title: Re: Setup Troubles
Post by: twooly on February 04, 2014, 01:59:41 pm

You are not allowed to view links. Register or Login

Does the SHOW.TXT file have a new line st the end. The triggers.txt file is required even if you do not use them.

Did the show work with the SD Card when you first got it. It had a set of test sequences on it.

No there is not a new line in the show.txt

Yes it did but I'm now trying to setup with one of my sequences.

Title: Re: Setup Troubles
Post by: TexasStingray on February 04, 2014, 03:21:41 pm

The show file needs the new line at the end of every 8 characters.  How many sequences are in the show file. Be sure you have each one a length of 8 and a new line at the end of every one.

Title: Re: Setup Troubles
Post by: twooly on February 05, 2014, 06:37:32 am

That did it, works good now.

I currently only have one that I'm just testing with.