DiyLightAnimation

Hardware => Lynx Aether => Topic started by: pete peters on February 25, 2014, 02:29:27 am

Title: Aether Lighting Curves??
Post by: pete peters on February 25, 2014, 02:29:27 am

Can any one tell me what the difference is between the
Aether 1, Aether 2, Aether 3, Aether 4, and Aether 42 light curves?
What would determine which one to use?

Thanks

PP

Title: Re: Aether Lighting Curves??
Post by: tbone321 on February 25, 2014, 12:47:01 pm

Ok, I'll bite.  Where are you seeing these lighting curves?

Title: Re: Aether Lighting Curves??
Post by: pete peters on February 25, 2014, 01:52:40 pm

The light curves that are in the Lynx Express programming utility.  They come from the pull down menu. There are many options for many different manufactures of light strings.

Thanks
PP

Title: Re: Aether Lighting Curves??
Post by: RJ on February 25, 2014, 02:59:54 pm

don't use them. they were for my testing. the Firmware already has the proper curves. Just flash the pic and you should be good to go.

RJ

Title: Re: Aether Lighting Curves??
Post by: tbone321 on February 25, 2014, 03:09:18 pm

You are not allowed to view links. Register or Login

The light curves that are in the Lynx Express programming utility.  They come from the pull down menu. There are many options for many different manufactures of light strings.

Thanks
PP

Those strings are for the Express, not the Aether.  The Aether II has its own LED or LED's with the Aether 1 and the proper curve has already been set.   As RJ stated above, they were for his own testing to make the Aether operate as he expected.  The Express uses them because different light strings have different dimming characteristics and the idea is to make different strings in the display all look the same or as close as possible at the different dimming levels.

Title: Re: Aether Lighting Curves??
Post by: pete peters on March 02, 2014, 04:07:21 pm

Thanks Very Much !
I appreciate you time!!

Pete Peters