DiyLightAnimation

Hardware => Lynx Express => Topic started by: Sloanhaus on May 27, 2009, 10:18:39 pm

Title: If I wanted to run 20 channels, what is the best way...
Post by: Sloanhaus on May 27, 2009, 10:18:39 pm

I have 18 of the 16 channel boards. I have one arch that is 20 channels. Can I just add a 4 channel ssr to this... If this has already been discussed let me know.

Thanks

Sloan

Title: Re: If I wanted to run 20 channels, what is the best way...
Post by: rrowan on May 27, 2009, 10:21:22 pm

You are not allowed to view links. Register or Login

I have 18 of the 16 channel boards. I have one arch that is 20 channels. Can I just add a 4 channel ssr to this... If this has already been discussed let me know.

Thanks

Sloan

Sure a SSR4-DMX will work just fine. Well unless you are using a special curve on the LE. If the LE is left at the default then you shouldn't see any difference.

Rick R.

Title: Re: If I wanted to run 20 channels, what is the best way...
Post by: Ron on May 27, 2009, 10:57:14 pm

Rick is right, that would work great.

I had 4 arches last year, all next to each other.  Two of the arches where on an LE.  The other two arches used 4 SSRs off of a Freestyle.  I couldn't tell the difference.

Ron