DiyLightAnimation

Software => Vixen => Topic started by: ElectricCraft1 on June 13, 2009, 09:07:57 am

Title: scedule problem
Post by: ElectricCraft1 on June 13, 2009, 09:07:57 am

show has a router plugin prob lem at end and wont play more than once.  sequences play just fine b y themselves.  changed from com  9 to 10.  using 2.1.  should i go to 2.0.

Title: Re: scedule problem
Post by: memphislights on June 13, 2009, 11:39:08 am

make sure that the cross-fade between sequences is set to 0.

under "test program" in program management,

  try using "use a profile" to use a single profile for all sequences.

  I just use a profile with only the Dongle plugin defined.

Title: Re: scedule problem
Post by: ElectricCraft1 on June 13, 2009, 12:37:23 pm

i used the program plugin only.  had problems when i used sequence plugins.  cross fade is at 0.  should i still try the profile?

Title: Re: scedule problem
Post by: rrowan on June 13, 2009, 03:43:17 pm

You are not allowed to view links. Register or Login

i used the program plugin only.  had problems when i used sequence plugins.  cross fade is at 0.  should i still try the profile?

the sequence(s) should NOT have any profiles attached. Just use the Schedule Program to set the dongle com port. When running a show you also don't want or need the adjustable preview if you used that.

Title: Re: scedule problem
Post by: ElectricCraft1 on June 13, 2009, 05:43:42 pm

that is what I did.  just don't understand what is happening.

Title: Re: scedule problem
Post by: Greg on June 13, 2009, 11:01:14 pm

Thats interesting Rick,

Last Christmas (Vixen 2.09) I had profiles attached to all my sequences in the show and they all ran just fine.  In the Program, Manage, etc. I had the option "use each sequence's plugin setup selected.  Was I just lucky or am I misunderstanding you commentary?

Greg

Title: Re: scedule problem
Post by: rrowan on June 13, 2009, 11:50:27 pm

You are not allowed to view links. Register or Login

Thats interesting Rick,

Last Christmas (Vixen 2.09) I had profiles attached to all my sequences in the show and they all ran just fine.  In the Program, Manage, etc. I had the option "use each sequence's plugin setup selected.  Was I just lucky or am I misunderstanding you commentary?

Greg

All depends on how you setup the program manager. In this case just trying to reduce the number of possibilities. Went being there its makes trouble shooting a bit harder.

Besides that, I believe that RJ recommends using the schedule program with those settings.

Rick R.