DiyLightAnimation
Hardware => Lynx Express => Topic started by: galgon on November 27, 2015, 10:39:19 pm
-
I have an LE in my show that I am testing using the bobcat tester. When I turn on channel 2 at full power all is well. When I drop it down to about 50% channels 3 8 and 15 start flickering. As the level goes lower more channels come on. I tested the other channels and none show this issue.
Thoughts? I have (too many) spare LEs but would prefer not to take the hour to swap out the box if there were a couple of quick things to try first.