DiyLightAnimation

Hardware => Lynx Express => Topic started by: aesl1982 on February 27, 2016, 09:04:11 am

Title: Lynx data light stuck
Post by: aesl1982 on February 27, 2016, 09:04:11 am

So I have 6 Lynx expresses now. 4 work perfectly. One one of them even if nothing is plugged in the data light stays lit. But the controller functions properly. Something to worry about or no? Second issue is that on one the dmx in and out ports. The dmx im port the data led is very dimly lit and turns all channels on. However if I unplug from dmx in and plug into dmx out the controller functions and recieved data and outputs data to the lights as it should. Just not Outta the dmx in port? Any suggestions for that. Or should I just make it last in line and daisy chain from dmx out on box 5 to dmx out to box 6 and call it a day


Sent from my iPhone using Tapatalk

Title: Re: Lynx data light stuck
Post by: dcwehw99 on February 28, 2016, 03:45:43 pm

As far as the first issue goes some of the RS485 chips cause the light to be on all the time. It does not cause an issue with functionality so that is not really an issue.  Swapping it with another RS485 chip on the board may change its state but all the RS485 chips probably came from the same batch.

Denny