DiyLightAnimation
Store => Current Coop's => Topic started by: t.jo13 on May 03, 2016, 02:24:00 pm
-
This Co-Op is for the Smart String Controller (SSCv4) !!!
Please read this post completely before participating in this Coop.
For any information on any of this equipment please refer to the proper forum and ask your questions there to keep this coop forum clean and easy to follow.
By participating in this Coop you agree that the Coop manager and DLA (as a board and to also include all administrators, moderators, and members) shall not be held responsible for any liability.
You are joining this Coop at your own risk. As with any Coop, this Coop is subject to the Forum Coop Rules.
These rules can be reviewed using the following link.
http://diylightanimation.com/index.php?topic=111.0
This coop may close when limits of 300 SSC v4, OR AT DISCRETION OF THE COOP MANAGER. If limits not reached by 3:00 pm PDT on 6/15/16 the coop may be closed.
KIT 1 WILL INCLUDE ALL PARTS AND THE PCB but no pigtails!!!
All other Kits are for Pigtail options only. If you want a certain type of pigtail included you must include them in your order!!!!
PICs will not be pre-programmed in this coop
***************************************************************************************************
The pricing below will include all fees, shipping and handling charges to get the items to the Coop Manager.
Kit #1 Smart String Controller v4: This kit includes parts for the SSC v4+PCB. Parts + PCB,
Per Kit At Qty 100 - $8.17
Kit #2 Cat5 waterproof Pigtail: This kit will include ONLY the RJ45 pigtail. The Pigtail is the female connection at the end of the Smart String Controller that the cable coming from the Hub will plug into. ( picture attached of waterproof pigtail )
Per Kit At Qty 100 - $2.94
Kit #3 3 PIN Pigtail: This kit will include ONLY the 3 pin pigtail. The 3pin is the male and female and it can be used to connect the strings to the SSC.
Per Kit At Qty 100 - $0.97
Kit #4 SSC4 PCB only NO parts
Per kit at Qty 100 - $2.14
Kit #5 4 PIN Pigtail: This kit will include ONLY the 4 pin pigtail. The 4pin is the male and female and it can be used to connect the strings to the SSC.
Per Kit At Qty 100 - $1.65
Kit #6 Parts only for the ssc4: Per Kit At Qty 100 - $5.94
***************************************************************************************************
As always higher numbers reduce pricing and lower numbers increase pricing.
You can update or change your order during the ordering portion of the Coop.
Shipping will be by US Postal Service Priority Mail Flat Rate boxes. We can fit 6 kits in a small flat rate box. More than 6 will require a medium flat rate box.
Small - $6.58
Medium - $12. 85
If you wish to have insurance on your package it is your responsibility to choose the amount and lookup the cost to add. You must add this to your Paypal payment and in the comments explain you paid for insurance and how much coverage. We cannot be held responsible for your package once it is accepted at the post office and we have a receipt of shipment if it is not insured.
Post with the quantity you wish in this thread. Please do not post questions or your thoughts in the coop thread. Start a new thread in the correct area for these. Coop threads are strictly for people requesting orders. If you later wish to change your quantity please post again clearly stating that this is an update to a previous order and how many you wish it to be now.
If you have any questions please post a new thread to help keep the coop thread clean.
-
| Member name | kit 1 # qty | kit # 2 qty | kit # 3 qty | kit # 4 qty | kit # 5 qty | kit # 6 qty | Paid | Shipped |
| chrisatpsu | x | x | x | 25 | x | x | | |
| FlashG | 10 | 14 | 10 | 10 | x | x | x | |
| mmccrae | 16 | 16 | x | 32 | x | x | | |
| LasVegasF250 | 20 | x | x | 4 | 10 | x | x | |
| ronniek | 20 | 30 | x | 10 | x | x | x | |
| bamabugs | x | x | 15 | 15 | x | x | x | |
| Penfold | 5 | 15 | x | x | 10 | x | x | |
| JZ | 12 | 12 | 12 | x | x | x | x | |
| edwinpeek | 12 | 12 | 12 | x | 12 | x | | |
| animal | 6 | x | x | x | x | 12 | x | |
| johno123 | 8 | 8 | 8 | x | x | x | | |
| monkey | 15 | x | 30 | 15 | 30 | x | x | |
| PyBir8d | 16 | 17 | 17 | 18 | x | x | | |
| lonewolf | x | x | 30 | x | 30 | x | x | |
| caretaker | 16 | x | x | x | x | x | x | |
| izard050 | 12 | 12 | 12 | x | x | x | | |
| FireMedic4Christ | x | 10 | x | x | x | x | x | |
| Total | 155 | 124 | 134 | 129 | 92 | 12 | | |
-
Reserved
-
25 kit#4 (pcb only)
-
Kit #1 - 10
Kit #2 - 14
Kit #3 - 10
Kit #4 - 10
Thanks,
FlashG
-
Kit # 1 - 16
Kit # 2 - 16
Kit # 4 - 32
Thanks,
-
Kit #1 - 20 each
Kit #4 - 4 each
Kit #5 - 10 each
Thanks.
-
Kit #1 - 20
Kit #2 - 30
Kit #4 - 10
Thanks
-
kit#3 15
kit#4 15
Please Thanks for having this coop.
-
Please put me down for the following:
Kit#1 5
Kit#2 10
Kit#5 10
Thanks for doing this!!!! ;D
-
Update
Just got back from vacation will update list tonight or first thing in the morning
Joe
-
Kit 1 - 12
Kit 2 - 12
Kit 3 - 12
-
kit 1 qty 12
kit 2 qty 12
kit 3 qty 12
kit 5 qty 12
Please and thank for the coop
-
6-kit 1
12-kit 6
thank you
animal
-
Kit 1 - 8
Kit 2 - 8
Kit 3 - 8
Thanks!
-
Good Morning,
May I please order:
Kit #1 - 15
Kit #3 - 30
Kit #4 - 15
Kit #5 - 30
Thanks for running this.
Mike
-
Kit 1: 16
Kit 2: 17
Kit 3: 17
Kit 4: 18
Thank you for all your time and support!
--Will
-
I would like:
30 of kit 3
30 of kit 5
Thanks,
-Keith
-
Please increase my Kit#2 by 5.
This should be the total to 15 on Kit#2.
Thank you.
-
16 0f Kit 1 please.
Thanks for doing the coop.
-
I'd like 12 kit 1, 12 of kit 2 and 12 of kit 3
-
10 of kit 2
Brian
-
This ssc4 coop is now closed. Please check the list on the first page with the coop members and what they ordered and make sure your order is correct. Send me a pm if you find an error in your order. I will be sending out payment pm's as soon as I get all of the final quotes
Thankyou for paticipating in this coop
Joe
-
All final quotes are in and I will be sending out payment pm's in the nextcouple of days
Joe
-
All payment pms have been sent out to the participatinggmembers for this coop. If you did not receive one please send me a pm and I will send one out to you.
Thankyou for participating in this coop
Joe
-
Payment window will close in 5 days. There are just a few left that still need to pay. If you paid and dont see that you have paid then please send me a pm and I will correct it
Joe
-
The payment window for the coop will close in 2 days for those that have not paid. There are a couple that have paid and I will update the list for you when I get home friday night. I sent you a pm as well
Joe
-
Arrived home and found that I received packages from Ray. Mouser parts are here as well . I ordered the boards a little later than I wanted to but they will be here soon. I will ship out what I can in the next few days.
Joe
-
Any status updates?
-
Kit 1 - quantity 10
Kit 2 - quantity 15
Kit 3 - quantity 15
Thank yoy for running the COOP
-
Kit 1 - quantity 10
Kit 2 - quantity 15
Kit 3 - quantity 15
Thank yoy for running the COOP
Just to let you know, this COOP closed back in June.
-
Arrived home and found that I received packages from Ray. Mouser parts are here as well . I ordered the boards a little later than I wanted to but they will be here soon. I will ship out what I can in the next few days.
Joe
Joe do you have an update as to when these will ship?
Thanks.
-
I would like an update please. What's the hold up? Is it the PCB fabrication, trying to locate parts, or something else?
-
Thankyou for everyones Patience, as I had unexpected knee surgery that didnt go as planned. I have been playing catch up with work and home ever since. I was planning on shipping last week but had a hurricane coming in our direction and had to batton down the hatches. Lots of rain, some wind damage and lost power for a couple days but faired better than many.
That said When I was setting up to start shipping I noticed that there are a few people that do not have their shipping address in paypal that I overlooked.when payments were made. Please check you Information in paypal and make sure its provided. If you do not get a shipping confirmation by Thursday send me a pm and provide your user name and address so I can get your Items shipped. Unfortunately I do not have The time right now to be chasing shipping addresses.
Thankyou
Joe
-
Hey Joe,
I got a notice from PayPal that you refused to ship my product because you said my address did not print. My address has always been in PayPal, I've ordered many times from many different people. I checked PayPal just to make sure and it is still set up right. Please refund my money Since your not sending me my order.
ronniek@cebridge.net
-
Hey Joe,
I got a notice from PayPal that you refused to ship my product because you said my address did not print. My address has always been in PayPal, I've ordered many times from many different people. I checked PayPal just to make sure and it is still set up right. Please refund my money Since your not sending me my order.
ronniek@cebridge.net
If you look close enough you should have 2 notices as paypal was having issues with generating a shipping label, you go to print after they take your money and they give a print error. so I attemped to printed it twice then had to cancel 1 shipping label.
-
Hey Joe,
I got a notice from PayPal that you refused to ship my product because you said my address did not print. My address has always been in PayPal, I've ordered many times from many different people. I checked PayPal just to make sure and it is still set up right. Please refund my money Since your not sending me my order.
ronniek@cebridge.net
As a followup on your concern, Attached is a screen shot of your transaction. If you notice the circled areas there are 2 different transaction numbers less than 1 minute apart. A stated before that is why you received 1 cancelled shipping notice.
Joe
-
Received my order today. ;D Now I need to get to work soldering.
Thank you, Joe.
-
I got my order.
Thanks Joe
-
Received my order. Thanks