DiyLightAnimation
Hardware => Lynx Splitter => Topic started by: mschell on September 04, 2009, 02:33:40 pm
-
Since the coop is almost ready to order, I started checking for the parts needed to build a board.
Mouser doesn't have the listed 8-pin IC sockets in stock, and won't have them for at least 5 weeks, so I started looking for alternatives.
The listed socket in the BOM is this one: Tyco/Amp 1-390261-2
http://www.mouser.com/Search/ProductDetail.aspx?R=1-390261-2virtualkey57100000virtualkey571-1-390261-2 (http://www.mouser.com/Search/ProductDetail.aspx?R=1-390261-2virtualkey57100000virtualkey571-1-390261-2)
A reasonable substitute might be this one: 3M 4808-3004-CP
http://www.mouser.com/ProductDetail/3M-Electronic-Solutions-Division/4808-3004-CP/?qs=sGAEpiMZZMs%2fSh%2fkjph1tvt1%2fmEPT%2fXoly%252bzOlimWvs%3d (http://www.mouser.com/ProductDetail/3M-Electronic-Solutions-Division/4808-3004-CP/?qs=sGAEpiMZZMs%2fSh%2fkjph1tvt1%2fmEPT%2fXoly%252bzOlimWvs%3d)
Just a difference of 2-3 cents per socket.
Will this still work? Thought I'd check with the "experts"!
-
.100 Pin spacing 8 contacts .300 row spacing. Should be fine.
The best part is they have kinked tails to bad they don't make a 6 pos. It would make building an LE easier, because I'm lazy.