DiyLightAnimation

Hardware => Lynx Splitter => Topic started by: Sloanhaus on December 07, 2009, 10:20:28 pm

Title: Which case do I use for the splitter
Post by: Sloanhaus on December 07, 2009, 10:20:28 pm

I looked in the wiki and couldnt find which case to purchase for the splitter. Any help would be appreciated.

Thanks

Brad Sloan

Title: Re: Which case do I use for the splitter
Post by: RJ on December 07, 2009, 10:22:06 pm

Same case as the SSR4 the TA200 I think is the number. It is in the wiki, just find the case for a SSR4.

RJ

Title: Re: Which case do I use for the splitter
Post by: rrowan on December 07, 2009, 10:58:24 pm

Direct copy from the Splitter BOM page in the wiki


Case (Telephone Demarcation Enclosure 3.75 x 3 x 1.5) http://www.yourbroadbandstore.com/product.php?pid=701663

Rick R.

Title: Re: Which case do I use for the splitter
Post by: mschell on December 08, 2009, 02:18:34 pm

While I understand the PCB was sized to mount in this case, and it does fit well, I have a question regarding cable egress (in and out).

Trying to get 4 or 5 cat-5 cables in and out of that small enclosure is fairly difficult, and does tend to crimp the cables, especially with the top entry and the cover closed.

Luckily, I was able to keep my splitter indoors and have the case open.

I'll be looking for an alternate way to package this next year if I put a splitter out in the yard.