DiyLightAnimation

Hardware => Lynx Wireless DMX => Topic started by: bisquit476 on August 16, 2010, 05:52:37 am

Title: TX/RX build
Post by: bisquit476 on August 16, 2010, 05:52:37 am

Here is a TX/RX build in pictures. Hope someone finds it useful.

Title: Re: TX/RX build
Post by: Jeffl on August 16, 2010, 08:39:21 am

Thanks for the how-to.  I'm hoping for a box today and this will be very helpful.

Title: Re: TX/RX build
Post by: joshuashu on August 16, 2010, 10:41:00 am

Thanks so much this helps a lot! should be a fun day of soldering.  ;D ;D ;D

Title: Re: TX/RX build
Post by: kj77rn on August 16, 2010, 04:43:02 pm

Will the Tx/Rx work without the LED's soldered in?  I left mine out also, awaiting cases.

Title: Re: TX/RX build
Post by: Dennis Cherry on August 16, 2010, 05:30:03 pm

The LED's are just indicators for power and DMX data link.

Title: Re: TX/RX build
Post by: bisquit476 on August 16, 2010, 10:40:25 pm

You are not allowed to view links. Register or Login

Will the Tx/Rx work without the LED's soldered in?  I left mine out also, awaiting cases.

I have one built with, and one without LED's, both work flawlessly.

Title: Re: TX/RX build
Post by: RJ on August 23, 2010, 12:53:19 am

This pdf has been linked to in the wiki for the ver 2 wireless stuff.

RJ

Title: Re: TX/RX build
Post by: ron d on August 25, 2010, 04:44:21 pm

I want to power this with a 9v battery. Not sure if they were 6v but I could even build a 6v battery pack with 4 AA batteries and attach the wall wart plug end and that way i could use them battery powered or use the cord. Anyway any suggestions to make these fully wireless would be great.

Thanks,

ROn d

Title: Re: TX/RX build
Post by: tbone321 on August 25, 2010, 05:12:38 pm

I doubt that a battery would work very well.  Using a battery would have you manually turning the unit on and off every night or more like pluging in and unplugging the battery.  I would believe that the TX/RX would make short work of a standard 9V battery.  Anyway you look at it, the unit will require an ethernet cable plugged into it so it will never be "completely" wireless.  There has been discussion of supplying power units like these by using one of the unusd pairs in the ethernet cable but as RJ pointed out, there could be issues doing that.

Title: Re: TX/RX build
Post by: smartcontrols on August 25, 2010, 06:17:38 pm

I set up a TX/RX connected to my MR16 with 30 lights connected. This is all connected to 2 six-volt lantern batteries. It has been running and blinking non stop for 3 days now. It is fully wireless for my Halloween costume as I walk around.  :) :)

Title: Re: TX/RX build
Post by: chrisatpsu on January 12, 2011, 05:35:44 pm

Lynx Halloween Costume?

Pictures or it never happened    : )

Title: Re: TX/RX build
Post by: wwwgator on March 31, 2011, 04:35:54 am

silly question, not found in the wiki...

The wireless (ver 2) will do one universe.....
Will it do PixelNet ?  just curious.

Title: Re: TX/RX build
Post by: mmais68569 on March 31, 2011, 06:04:53 am

What type of power supply is everyone using & where can I get ?

                    Mike

Title: Re: TX/RX build
Post by: n1ist on March 31, 2011, 07:22:59 am

If you are buying the parts kit, it will come with the transformer.  It is a Triad WDU6-300,
"Plug-In AC Adapters 6VDC 0.3A 4.5W 120VAC ", Mouser part number 553-WDU6-300

/mike

Title: Re: TX/RX build
Post by: kylec on March 31, 2011, 10:13:30 am

You are not allowed to view links. Register or Login

silly question, not found in the wiki...

The wireless (ver 2) will do one universe.....
Will it do PixelNet ?  just curious.

NO

Title: Re: TX/RX build
Post by: tbone321 on March 31, 2011, 11:56:44 am

You are not allowed to view links. Register or Login

silly question, not found in the wiki...

The wireless (ver 2) will do one universe.....
Will it do PixelNet ?  just curious.

The Wilreless can do one full DMX universe but it does not do Pixelnet.

Title: Re: TX/RX build
Post by: mmais68569 on March 31, 2011, 07:05:59 pm

You are not allowed to view links. Register or Login

If you are buying the parts kit, it will come with the transformer.  It is a Triad WDU6-300,
"Plug-In AC Adapters 6VDC 0.3A 4.5W 120VAC ", Mouser part number 553-WDU6-300

/mike

So if I am in the wireless coop this part is included.

                Mike

Title: Re: TX/RX build
Post by: tbone321 on March 31, 2011, 07:12:07 pm

If you ordered the parts kit the the Tx/Rx then yes, it is included.