DiyLightAnimation

Hardware => Lynx Aether => Topic started by: Mickpat on November 07, 2010, 05:30:00 pm

Title: Connection between Aether
Post by: Mickpat on November 07, 2010, 05:30:00 pm

What is the best way to connect Aether DMX to Express?  Everything I run uses standard RJ45 connectors.  Do I need to use a DMX to RJ45 adaptor per flood light?

http://www.productionadvantageonline.com/Control-Adapters-Terminators/XLRJ45-3F.aspx

Title: Re: Connection between Aether
Post by: RJ on November 07, 2010, 06:31:31 pm

You are not allowed to view links. Register or Login

What is the best way to connect Aether DMX to Express?  Everything I run uses standard RJ45 connectors.  Do I need to use a DMX to RJ45 adaptor per flood light?

http://www.productionadvantageonline.com/Control-Adapters-Terminators/XLRJ45-3F.aspx

It almost can't be done...  ;D  

Really you just use a standard cat5 cable they both use the same RJ45 cat5 jacks for connections.

RJ

Title: Re: Connection between Aether
Post by: Mickpat on November 08, 2010, 12:38:56 am

Thanks.  Watching the video it looked like the connector was XBR, but I can now see it is RJ45.  Thanks.