DiyLightAnimation

Hardware => Lynx Aether => Topic started by: batdive on November 16, 2010, 12:10:43 pm

Title: Wireless with Aether, white on briefly wireless link loss
Post by: batdive on November 16, 2010, 12:10:43 pm

RJ, I have noticed during some testing that when the Aethers loss signal for even a split second during test sequences, they revert to the white channel.  So your sequence might have a couple flashes of white depending on how good the wireless link is and the angle/location of Aether to the TX.

Is there a way to have the Aether keep the last received color until it is updated instead of the flash of white?

IE do 5 seconds of blue and briefly loses signal at second 2 ( you get bright flash of white) then back to blue.


Thanks not to add more to your holiday season just a quick question/suggestion.


-JS

Title: Re: Wireles with Aether, white on briefly wireless link lossRJ
Post by: RJ on November 16, 2010, 09:11:47 pm

What your asking is what it does. The issue is not with total signal loss but corruption when the signal is weak. So it thinks it is getting a good signal. I include error correction but it can not always catch this. If the signal is good it should not be an issue.

RJ