DiyLightAnimation
Hardware => Lynx Wireless DMX => Topic started by: kevr on July 08, 2011, 12:15:10 am
-
I am putting together hardware for this years show and am a bit unsure of the easiest option to run both wired and wireless on the same universe.
I am mainly running low voltage LED here in New Zealand with some 240v rope light, I will be using my original Express, 3 MR16's, a Lynx Freestyle and a Tiger48
The Freestyle mounted in my garage with cat5 cabled to a box out in the yard with 6 sockets one is dmx out from the Freestyle to the Tiger, the MR16's and the Express will be run wireless.
From the wireless diagrams I have found I noted that none showed both wired and wireless out of 1 dongle, is this possible or do I need to use 2 dongles? Can I have PC - dongle - Lynx splitter - TX.
-
Greetings,,,
Yes, that would work. You can have a wireless transmitter anywhere along a DMX stream. It's just impossible to have every possible combination on the diagrams. Everyone has a little bit different situation at their location.
Keith
-
Thanks Kieth, I will have to keep an eye out for a couple of splitter PCB's I just missed out on the Coop unfortunately.
Kev :-)