DiyLightAnimation
Hardware => Lynx Wireless DMX => Topic started by: tthompson on November 09, 2011, 08:39:08 am
-
I've read through Brian's post http://diylightanimation.com/index.php?topic=5329.msg87769#msg87769 and have the wires hooked in.
I get a power light on wireless and a flashing green on wireless but no blinky on the renard.
I took the stock renard DMX .asm and compiled it.
I suspect the problem is with the .hex on the PICs I programmed on the renard.
Does anyone have tips/example of a .asm that works for renard wireless?
Thanks.
-
Tthompson,
First question which Renard board are you hooking up, the settings are different depending on the board.
If you PM me and I could provide you with a link for a working hex file for your board.
I could also help you diagnose your problem further.
Brian
** edit oops, you said it was a Ren 24 in the title, I will send you a PM with a link.**
-
thank you.
I got the PM and will reprogram the PICs shortly. I know wireless is working to another Lynx Express using the TX/RX and the EX/RX module.
Here's hoping it will just be the .hex file.
on a side note, I got my first smoke puff/fried board when I applied power to the HOT and TRANSFORMER inputs on the Renard board. >:( Loud POP and puff of smoke from the board. Not a good sign.
Hopefully on the transformer is blown and lesson learned and I will have to make sure I don't do that again.
-
SUCCESS!!!
The problem that I had was that I pulled the RS485 chip from the right side which is the "OUTPUT" side. I pulled both RS485 chips and only have the wireless connected to the "INPUT" side and all is well and works like a charm.
Thanks for the help. I will work on creating the correct .HEX files to address each box now.
TimT.
-
Glad you got it working, let me know if you need any help.
Brian