DiyLightAnimation

Hardware => Lynx Wireless DMX => Topic started by: Freebird on November 13, 2011, 11:06:06 am

Title: Setup
Post by: Freebird on November 13, 2011, 11:06:06 am

Will this setup work?


LAPTOP----------------Pixelnet Dongle-------------Wireless TX……………………

…….LE1/RX---------SSC Hub------------SSC


---------------  Wired
………………… Wireless


Freebird

Title: Re: Setup
Post by: rrowan on November 13, 2011, 11:13:51 am

Nope

The SS has to be in front of the DMX (assuming you are using one dongle) and it can't use dmx wireless

So it should be

````````````PC PS
Laptop ---- Pixelnet Dongle ----SS Hub ---Wireless TX…….LE1/RX
````````````|
````````````SSC

Rick R.

Title: Re: Setup
Post by: rm357 on November 13, 2011, 10:04:33 pm

The lynx wireless is DMX only right now. In the future, it will also do pixelnet sync/timing, but never pixelnet data.

If you need wireless pixelnet, you need an etherdongle and an wifi router with a client/bridge setup. If you are not in the current etherdongle coop, that is not likely to happen this year.

RM