DiyLightAnimation

Hardware => Lynx Smart String => Topic started by: rrowan on April 17, 2012, 08:50:08 pm

Title: Pictures of the 16 port passive hub and SSC v2
Post by: rrowan on April 17, 2012, 08:50:08 pm
Hi folks

I hope this helps some.

Rick R.
Title: Re: Pictures of the 16 port passive hub and SSC v2
Post by: Zeph on April 17, 2012, 09:01:30 pm
Thanks!

Are all 16 distribution-to-SSC jacks in the same universe, or can you select more than one universe?

I'm guessing that the jumper blocks are for A and B and must match, and that the board can select a single universe to feed out to all 16 jacks.
Title: Re: Pictures of the 16 port passive hub and SSC v2
Post by: chrisatpsu on April 17, 2012, 10:00:25 pm
yes, all 16 are on the chosen universe
Title: Re: Pictures of the 16 port passive hub and SSC v2
Post by: Penfold on May 04, 2012, 05:58:52 pm
It looks like the wiring is as follows:

Data + = White Orange
Data - = Orange
PWR = Blue,WhiteBlue,White Green
GND = Brown, Green, White Brown

Is this wiring correct?
Title: Re: Pictures of the 16 port passive hub and SSC v2
Post by: rrowan on May 04, 2012, 06:18:48 pm
You are not allowed to view links. Register or Login
It looks like the wiring is as follows:

Data + = White Orange
Data - = Orange
PWR = Blue,WhiteBlue,White Green
GND = Brown, Green, White Brown

Is this wiring correct?

Gee I sure hope so. That SSC has been running just fine for me since mid March. In fact its on right now.

Rick R.
Title: Re: Pictures of the 16 port passive hub and SSC v2
Post by: dpitts on May 04, 2012, 06:20:58 pm
I really like the combining of all the positive and negative wires of the pigtail of SSC. That will make it much easier to put on pigtail.
Title: Re: Pictures of the 16 port passive hub and SSC v2
Post by: taybrynn on May 04, 2012, 06:39:52 pm
Amen to that  >.d9 !!!
Title: Re: Pictures of the 16 port passive hub and SSC v2
Post by: chrisatpsu on May 04, 2012, 08:37:15 pm
You are not allowed to view links. Register or Login
It looks like the wiring is as follows:

Data + = White Orange
Data - = Orange
PWR = Blue,WhiteBlue,White Green
GND = Brown, Green, White Brown

Is this wiring correct?

it's the exact same wiring as the first SSC...