DiyLightAnimation
Store => Finished COOPS => Topic started by: rmp2917 on July 11, 2012, 10:39:21 pm
-
This Coop is for the Dumb String Controller (DSC).
*********************************************************************************
Please read this post completely before posting in this Coop.
This Coop will have only one option. It will be for a complete kit including PCB, RJ45 Pigtail, and parts.
Information can be found here:
http://www.diylightanimation.com/wiki/index.php?title=Equipment#Smart_Strings (http://www.diylightanimation.com/wiki/index.php?title=Equipment#Smart_Strings)
http://diylightanimation.com/index.php?topic=8814.msg124322#msg124322 (http://diylightanimation.com/index.php?topic=8814.msg124322#msg124322)
*********************************************************************************
This Coop will close on July 25, 2012 at 8:00 PM Eastern Standard Time.
We have a base goal of 100 kits. This goal allows the cost per unit to drop low enough to make it cost effective to run the coop. Below this number we will not make the order.
The Coop will not have a maximum number of kits. However, the coop may close early at the coop managers discretion
if a large number of kits are requested.
Full Payment is expected when the Coop is closed. All members will receive PMs with details how to pay. No parts can be purchased until all members have paid.
Please get your PayPal payments in as soon as you get the Coop PM. Delaying your payment will delay the coop for everyone.
By joining this Coop you also agree that the Coop manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Coop at your own risk.
As with any Coop this Coop is subject to the forum rules. These rules can be reviewed using the following link.
Forum Coop rules
http://diylightanimation.com/index.php?topic=111.0 (http://diylightanimation.com/index.php?topic=111.0)
*********************************************************************************
Here is the pricing breakdown based on the initial estimates.
Pricing is in US Dollars and includes PayPal and Coop fees.
DSC Kit With PCB, RJ45 Pigtail, and parts.
Per Kit At Qty 100 - $15.00
This is only an estimate. As always higher numbers reduce pricing and lower numbers increase pricing.
*********************************************************************************
Shipping will be by US Postal Service Priority Mail Flat Rate boxes. Several kits should fit in a small flat rate box.
Shipping Charges: for the “Small†flat rate box with PayPal fees. (In US Dollars)
Domestic: $5.50
Canada and Mexico: $13.33
All Others: $17.44
Insurance on your package will be optional. The amount to add to your payment will be included in the payment PM. You must add this to your PayPal payment and in the comments explain you paid for insurance and how much. We cannot be held responsible for your package once accepted at the post office.
*********************************************************************************
Post with the quantity you wish in this thread. Please do not post questions or your thoughts in the coop thread. Start a new thread in the correct area for these. Coop threads are strictly for people requesting kits. If you later wish to change your quantity please post again clearly stating that this is an update to a previous post and how many you wish it to be now.
Thanks,
Rick P.
-
Username | Qty. | Paid | Ins. | Shipped |
rmp2917 | 8 | Y | | Y |
PJNMCT | 12 | Y | | Y |
odlids | 10 | Y | | Y |
fertsy | 5 | Y | | Y |
onesmoothhead | 6 | Y | | Y |
travailen | 10 | Y | | Y |
JerryPlak | 20 | Y | | Y |
twooly | 10 | Y | | Y |
Sly | 5 | Y | | Y |
Steve Gase | 10 | Y | | Y |
bcstuff | 6 | Y | | Y |
tmcteer | 17 | Y | Y | Y |
AverageJoeTX | 10 | Y | | Y |
loveroflife96 | 5 | Y | | Y |
frankr | 16 | Y | Y | Y |
deplanche | 32 | Y | | Y |
gsxrgirl7 | 8 | Y | Y | Y |
smeighan | 5 | Y | | Y |
johno123 | 10 | Y | | Y |
mgholland | 6 | Y | | Y |
pk | 6 | Y | | Y |
OkieJay | 4 | Y | | Y |
monkey141 | 5 | Y | | Y |
brandonj | 5 | Y | | Y |
popcorn | 6 | Y | | Y |
TexasStingray | 12 | Y | | Y |
ksbcay | 4 | Y | | Y |
Ron | 6 | Y | | Y |
combustionmark | 10 | Y | | Y |
richagem | 5 | Y | | Y |
gforman | 2 | Y | | Y |
mitch09 | 10 | Y | | Y |
grumpy2076 | 10 | Y | | Y |
FlashG | 10 | Y | | Y |
jess_her | 4 | Y | | Y |
pHoZfoRus | 6 | Y | | Y |
wwwgator | 5 | Y | | Y |
teager23336 | 4 | Y | | Y |
TMB | 6 | Y | | Y |
n1ist | 3 | Y | | Y |
rcouto | 4 | Y | | Y |
t.jo13 | 10 | Y | | Y |
Mimir | 10 | Y | | Y |
John K | 5 | Y | | Y |
dcwehw99 | 10 | Y | | Y |
chrisatpsu | 8 | Y | | Y |
kjam22 | 6 | Y | | Y |
Penfold | 2 | Y | | Y |
lightingboy82 | 8 | Y | | Y |
inzeos | 2 | Y | | Y |
rm357 | 2 | Y | | Y |
gzformula | 2 | Y | Y | Y |
Ozmin | 15 | Y | | Y |
einstein2883 | 3 | Y | | Y |
rrowan | 4 | Y | | Y |
kj77rn | 4 | Y | | Y |
mokeefe | 12 | Y | | Y |
Kwajtony | 12 | Y | Y | Y |
rdebolt | 10 | Y | | Y |
PIC | 2 | Y | Y | Y |
CW | 8 | Y | Y | Y |
taybrynn | 4 | Y | | Y |
egenoup | 4 | Y | | Y |
JDM1oc | 5 | Y | | Y |
Pete | 4 | Y | Y | Y |
curtbl | 14 | Y | | Y |
jnealand | 4 | Y | | Y |
tlh | 4 | Y | Y | Y |
edwinpeek | 15 | Y | | Y |
JoeFromOzarks | 4 | Y | Y | Y |
lineman | 10 | Y | | Y |
danozfw | 8 | Y | | Y |
kevinpickett | 3 | Y | | Y |
lortiz | 5 | Y | | Y |
fyb2000 | 8 | Y | | Y |
bwhite505 | 4 | Y | | Y |
therealbigjim | 10 | Y | | Y |
meman | 10 | Y | | Y |
thestig | 4 | Y | | Y |
Mike Hill | 10 | Y | | Y |
zwiller | 4 | Y | | Y |
vairmoose | 6 | Y | | Y |
davron12 | 20 | Y | | Y |
mkozik1 | 6 | Y | | Y |
lizard050 | 7 | Y | | Y |
trekster | 4 | Y | | Y |
wbe12345 | 3 | Y | | Y |
hicksjo | 4 | Y | | Y |
kfxi | 29 | Y | | Y |
Freebird | 3 | Y | | Y |
maffeirw | 3 | Y | | Y |
wildwillie | 4 | Y | | Y |
salongaopm | 10 | Y | | Y |
|
|
Total | 710 | 93 | 10 | 93 |
-
Put me down for two please.
Thanks,
-Paul
-
Put me down for 10 please.
Odlid Dave
-
5 please
-
Put me down for 3 please. Thank you
-
I would like 10 please.
Rick S.
-
Put me down for 16 Pleases 8)
-
5 please
-
Put me down for 5 please.
Thanks
-
Put me down for 10 please.
Thanks for running this coop!! >.d9
-
Thanks for running this!
Please put me down for
6 kits
Thanks
-
10 please
Thanks for the coop
Tom
-
5 please
-
I'll take 5
-
Please put me down for 16 Please.
-
I am in for 32.
-
Put me down for 8
Sent from my iPhone using Tapatalk
-
i would like 5
thanks
sean
-
Three please!
-
Put me down for 6 please.
Thanks for running the coop!!
Sent from my HTC Inspireâ„¢ 4G on AT&T
-
I would like 6 please
Thank you
-
Please put me down for 4.
Thanks,
Okiejay
-
Thanks for running this coop.
I would like 5 kits please.
Thanks,
Mike
-
5 please
-
6 please.
-
10 Please
-
I'l take 4
-
I'd like 6 please.
Ron
-
Count me in for 50. >.d9
Thanks for the coop, and waiting a month after the academy.
-
5 please.
Thanks,
Rich
-
Can any additional price quotes be posted. I'd like to get more but have a budget I need to try and stick to.
272 So Far
-
Put me down for 2
thank you
Glen
-
I'll take 10
Ryan
-
ill take 10 please and thank you
-
10 Please.
-
Hello
4 please
Thank you
-
Can you please put me down for 6.
Thanks in advance.
Russell
-
Please include me for 5 kits
Thanks
-
I would like 4 please.
Thanks
-
I would like 0 please. Thank Cancel Please
-
I would like 6 kits please!
And thank you for running the Coop!
TMB
-
I would like 3 kits. Thanks.
/mike
-
Put me down for 4
Kevin
-
Qty 4 please
Thanks!
-
Please put me down for 10 please.
thankyou for doing the coop
Joe
-
Please put me down for 10.
Thank you!
Sent from my Motorola Atrix2 via Tapatalk 2
-
5 please
Thanks
John K
-
10 please.
Thanks
Denny
-
6 please
-
This is an update and I would like to change my request of three (3) to a request of six (6). Thank you
-
I would like 6 please
-
Please put me down for two.
Thanks
-
i'm in for 8
-
In for 2
-
Please add 7 more for a total of 10. Thanks!!
-
Put me down for 2 please.
Thanks!
RM
-
Add 2 more to mine for a total of 12.
-
Current number is 415. If my # is right.
-
Put me down for 2 please.
thanks
-
I'll take 15 of them.
Thanks - Bill A.
-
I would like 3. Thank you
-
Put me down for 4
Thanks
Rick R.
-
Please put me down for 4.
Thanks
-
Can any additional price quotes be posted. I'd like to get more but have a budget I need to try and stick to.
272 So Far
I wouldn't expect the price to drop a lot. I think at a quantity of 1000 the price only drops about $1.70 for the parts. So, I wouldn't plan on more than 2 or 3 dollars drop in price.
-
I will try to update the quantities this evening when I get some time.
-
Can you put me down for 12 units.
Thanks for doing this coop.
-Mike
-
6 kits please
-
10 for me please. Thanks for running this COOP!
-
I will take 2 units
-
I would like 5 please.
Thanks,
Craig
-
I'll take 4 please.
And thanks for doing this!!
-
Put me down for 4
Thanks
-
I'll take 5 please.
Thanks,
Josh
-
Please put me down for 4 kits.
Thanks,
Pete
-
14 DSC's Please
Thanks so much for putting this coop together.
Curt
-
Two for me please. thanks
-
This is an update to a previous request.
Change my total to 10
Kevin
-
Please change my total from 2 to 4. Thanks
-
Please count me in for four (4). Thanks!
tlh/Terry
Sent from my iPhone using Tapatalk
-
I would like 8 kits please
-
I would like 4 controller kits please. Sounds like this is a upgrade smart string controller if I'm correct. Can I use this as a regular smart string controller? Just wanted to make sure.
I a dumb conductor:)
Thanks
Mort
It behaves like a smart string controller -- except from a software perspective, it only will handle a single pixel... that pixel controls a string of 12v led lights that will all light up together in the same color.
-
Four please. Thank you very much for running this coop!
:) joe
-
I would like 4 controller kits please. Sounds like this is a upgrade smart string controller if I'm correct. Can I use this as a regular smart string controller? Just wanted to make sure.
I a dumb conductor:)
Thanks
Mort
It is NOT a smart string controller in any way. A smart string controller supplies contant 12V power and a control signal that the smart string nodes use to control them. A dumb string controller simply supplies and controls power only. This is a common anode device which means that it sends out a costant +12V and controlls 3 common or ground leads. You would also notice that the smart string controller has three output lead while the dumb string controller has 4. While they are both PixelNet devices and plug into the Pixelnet hub, there outputs are very different and they control very different devices.
-
I WOULD LIKE 10 kits please
-
I am interested in 8 please.
-
Put me down for 3 please.
Thanks
Kevin
-
Hi,
3 kits for me.
Thanks for taking this coop.
Leo
-
I would like 8 kits please.
Thank you for running the COOP
-
I will take four please.
Thanks,
Brian
-
If we had a revised cost estimate that was much lower I might be tempted to add a couple for backup. We are now over 5 times the qty that was used for the estimate. Just wondering what the price might drop down to (just an estimate, not s guarantee), but I don't want to create work for anyone. There is still some time left before the coop closes.
-
The coop managers will not requote the coop as it goes. Until it finishes and we get updated quotes from every supplier they don't know what it will be.
RJ
-
4 kits please thanks
-
10 kits please.
-
I wouldn't expect the price to drop a lot. I think at a quantity of 1000 the price only drops about $1.70 for the parts. So, I wouldn't plan on more than 2 or 3 dollars drop in price.
If we had a revised cost estimate that was much lower I might be tempted to add a couple for backup. We are now over 5 times the qty that was used for the estimate. Just wondering what the price might drop down to (just an estimate, not s guarantee), but I don't want to create work for anyone. There is still some time left before the coop closes.
There will be a slight savings but it won't be too much.
-
Put me down for 10. Thanks!
-
2 please 8)
-
put me down for 10
thank you for running the coop
-
4 for me please. Thanks!
-
Please add me to the list for 6 controllers.
Thanks
Larry
-
I am going to have to cut back on my order. Change my order from 50 to 10. I will use MR16 to fill the gaps. Thanks.
-
I want to add 2 more to my order.
old order was 2 and new order is 2 more.
I want a total of 4 dumbstring kits.
Thank you
-
I think I could use 6 more so increase my request to a total of 12 please. Thank you.
-
Put me down for 20. Thanks.
-
6 for me please!
-
Please increase my original request of 5 to include 5 more for a new total of 10,
Thanks
-
Please put me down for 7
-
change my order to 8, please and thank you!
-
Please change my total from 16 to 20. Thanks
-
I would like to increase my order by 3 for a total of 8.
Thank you.
Craig
-
Please increase my order from 10 to 17.
Thanks
Tom
-
Please put me down for 4 please.
Thank You
Ron
-
Please increase my order by 5 so 10 total for me.
Thank you.
-
Hi,
Please increase my order from 3 to 5 kits.
Thanks,
Leo
-
Hi
Please put me down for 3 kits.
thanks
Wally
-
4 please
-
Please put me down for 29 controllers
Ken
-
Increase my order from 8 to 15 please
-
Please put me in for 3 Thanks for running this coop!!
-
Please put me down for 3. Thanks
-
Hi Rick,
Please up my total from 2 to 12.
Thanks,
-Paul
-
This Coop is now closed.
Please check the second post in this thread to verify your username is listed with the correct quantity. If not, send me a PM and I will correct it.
Thanks,
Rick
-
All payment PMs have been sent. If you did not receive yours, please PM me to let me know.
Please send your payment as soon as possible. Once I get all payments in, I can start ordering parts.
Thanks,
Rick
-
Payment sent. Thanks for doing this Rick!
-
Payment sent
Thanks for running this coop!!!
Tom
-
Payment sent! Thanks for your time and effort.
Sent from my Motorola Atrix2 via Tapatalk 2
-
Payment sent
-
Payment sent, Thanks for the coop Rick
-
Payment sent
Thanks for running this coop Rick!!!
JerryPlak
-
Paymant Sent
-
Payment sent. Thanks again for managing this coop.
-
Payment sent. Thanks.
-
Payment sent! Thx
Sent from my iPhone using Tapatalk
-
Payment sent! Thx
Sent from my iPhone using Tapatalk
-
payment sent >.d9 >.d9 >.d9 >.d9
-
Payment Sent Thank you for doing this.
-
Payment sent.
Thank you for running the coop.
MH
-
Payment sent
Thankyou for doing coop
Joe
-
Payment sent. Thanks!!!!
-
Payment sent thanks for running the Coop.
-
WHAT? Only 61 paid. Come on all you slackers, get your money in so the parts can be ordered. The CLAP must be getting to me. LOL.
-
WHAT? Only 61 paid. Come on all you slackers, get your money in so the parts can be ordered.
I second it.
-
OK, let's play nice. It's only been closed 4 days.
There was a time (before ipad) that I was only online about twice a week.
Coop rules are that no parts will be ordered until all payments are in.
For those that have not paid, please pay as soon as possible. If you cannot pay, please contact the coop manager to release your units from the coop. It is up to the coop manager to determine cutoff dates and the disposition of released units (usually a fire sale with same day payment required to avoid quantity changes that would require a new price quote).
Thanks,
RM
-
We are playing nice. We are just eager. Should not be anything wrong with a little friendly razzing. Sorry for putting up a comment that is not about coop ordering - my bad.
-
Payment sent. Sorry for the delay, was out of town past 4 days.
Thank you for making this COOP happen.
-
Payment sent. Had to wait for my account to be reopened.
Quit your <md..
Have fun.
-
There are 11 people (65 Kits) left to pay. I will send out reminders and give them a few more days to pay. If I do not hear from them, I will remove them from the coop.
Assuming I can get all payments in, I would like to start ordering parts this weekend while they are still in stock.
Thanks,
Rick
-
Payment sent. Sorry for the delay
Grant
-
if there are kits not payed for and are going to be put up to buy ill take 10 more
-
i'd like to get 10 if there are kits that are not paid for.
thanks!
-
Folks
There is no reserving any "possible" kits. Until the coop manager determines what he wants to do. Then at that time he MIGHT post that there are extra kits and its first come first server.
Rick R.
-
I'm paid :P
-
I have 10 kits that were not paid for. If anyone wants them, please post here.
The first person to post that can pay immediately will get them.
Thanks,
Rick
-
i want 10 please
-
i can pay now.
-
Payment sent.
BIG THANKS!!!
-
All kits are now taken. I will proceed with ordering.
Thanks,
Rick
-
Did you get everything ordered. Was anything on back order.
-
I have all of the parts and will start sorting them this weekend. I am just waiting for the the PCBs and pigtails.
Thanks,
Rick
-
Awesome! I can't wait. Thank you Rick.
-
If anyone has had a change in plan I would like to buy their kits. I need 6 more dumb string controllers.
-
rmp2917, Any Update?
-
I have most of the parts sorted. Still waiting on PCBs and Pigtails.
Once I receive everything and determine how many I can fit in a box, I will start sending out PMs for shipping payments.
Rick
-
Thank you for the update Rick! Your hard work is appreciated.
Sent from my Motorola Atrix2 via Tapatalk 2
-
Any Update?
-
Update: RJ has the PCBs but is still waiting on the pigtails. I have the rest of the parts ready to be boxed and shipped as soon as I get them.
My dad passed away yesterday. I will miss him. He really liked the Christmas lights so it will be a little sad putting them up this year knowing he won't be here to see them.
I will be busy the rest of the week, but will still try to get the coop out as soon as possible.
Thanks,
Rick
-
Rick,
Thoughts and prayers to you and your family.
Kurt
-
Rick,
So sorry for your loss, yes our thoughts and prayers go out to you in this time of need!
My dad loved coming and helping me setup up every year at thanksgiving, he also loved the lights, and he passed almost two years ago. I know your pain and my heart goes out to you!! I know no words can dull the pain, all I can say is just stay close to all your memories as those will last your lifetime!
Julie
-
Rick,
Thoughts and prayers to you and your family.
JerryPlak :(
-
So sorry to hear that Rick
Our thoughts and prayers to you and your family
Take care of you and your family first (the coop can wait)
Rick R.
-
So sorry to hear that Rick
Our thoughts and prayers to you and your family
Take care of you and your family first (the coop can wait)
Rick R.
rrowan said it best, take care of your family first this COOP comes second. I'll be praying for you and your family during this difficult time.
-
Our prayers and thoughts go out to you and your family. I agree, the coop is not the priority now, your family is. Spend the time with the family, they need you more than we need the controllers.
god bless
Kevin & Linda
Colorado Christmas
-
We will keep you in our prayers and ask GOD to lay a calming hand on your familys heart and yours. GOD BLESS
-
rrowan said it best, take care of your family first this COOP comes second. I'll be praying for you and your family during this difficult time.
+1
-
My prayers are with you and you family. God, Family, then others. Take care of your family first. God be with you.
-
rrowan said it best, take care of your family first this COOP comes second. I'll be praying for you and your family during this difficult time.
+1
+1
-
I hope that the lord eases the pain and is with you through this difficult time for you!
RJ
-
Our thoughts n prayers go out to you and your family! GOD BLESS <3
West Tawakoni, TX
-
rrowan said it best, take care of your family first this COOP comes second. I'll be praying for you and your family during this difficult time.
+1
Sent from my iPhone using Tapatalk
-
rrowan said it best, take care of your family first this COOP comes second. I'll be praying for you and your family during this difficult time.
+1
Sent from my iPhone using Tapatalk
+1
Take your time with your family. God Bless.
Kevin
-
I judt lost my own father not all that long ago so I know how that feels. Take fomfort with your family.
-
Certainly sorry to hear about your Dad Rick.. Any family member is a loss, but a dad is always tougher. Our prayers are with you and yours.
So a question to members here on the DSC.... how do we combine these, can the 4port and or the 16 port passive Smart String hubs work?
Or what is a good solution?
Thx
Curt
-
Post with the quantity you wish in this thread. Please do not post questions or your thoughts in the coop thread. Start a new thread in the correct area for these. Coop threads are strictly for people requesting kits.
-
Curt,
We try to keep other topics out of the coop post.
See here :
http://diylightanimation.com/index.php?topic=9425.msg130677#msg130677
RJ
-
PCBs and pigtails are on their way to me and I should have them in a few days.
I will start sending out shipping payment PMs as soon as I know the amount.
Thanks,
Rick
-
great job Rick!
-
Thank you for the updates and hard work on this coop.
God speed.
-
I'm starting to salivate, just got my dumb strings this week.
-
Thanks for the update Rick - Looking forward to getting these prior to Halloween!!
Great job with the coop and trust all is well with the family <res.
-
Shipping payment has been sent. Thanks for doing this for us Rick!
<res.
-
Shipping payment sent, Thanks for all your hard work
-
Payment Sent
-
;D Shipping payment has been sent. Thanks for doing this for us Rick!
-
How are you folks sending in shipping payments? I have not seen any pricing on shipping yet.
-
PM from rmp2917. He's probably sending the PM's out in batches.
-Mike
-
I have sent shipping notices for the kits that I know will fit in a small box and the ones that will definitely require a medium box. I am waiting on the rest until I know for sure what size box is needed.
I will be picking up the PCBs and pigtails from the Post Office this afternoon and will be able to send the rest of the shipping notices this evening or tomorrow. I hope to have all kits shipped by this weekend assuming I receive payments.
Thanks,
Rick
-
All shipping payment PMs have been sent.
8 kits or more will require a medium box. Less than 8 will fit in a small box.
Rick
-
Shipping payment sent.
Thank you,
Grant
-
Payment sent.
Thanks Heaps!
-
Payment sent. ;)
-
Payment sent.
-
Payment sent along with a small donation. Thanks for running this coop.
-
payment sent
thank you
-
Shipping monies sent.
Thanks Rick.
-
WOW, my package arrived a full day ahead of what the tracking indicated. Now to heat the iron. Nice packing job.
-
WOW, my package arrived a full day ahead of what the tracking indicated.
I guess that means mine should be here tomorrow! ;D
-
I hope mine get here this week so I can sneak them in the house before the other half asks what the heck else I bought.
-
Got mine today. Great job. I assume the pic has NOT been programmed. If not, when will the code be posted? Also, any news on an assembly manual? The pcb looks pretty straight forward but I don't want to screw it up. Thanks again.
-
Got mine today. Great job. I assume the pic has NOT been programmed. If not, when will the code be posted? Also, any news on an assembly manual? The pcb looks pretty straight forward but I don't want to screw it up. Thanks again.
The Pic is not programmed. I don't even have the firmware. I don't know when the assembly manual or the firmware will be posted.
Rick
-
Mine arrived too. Thanks!
/mike
-
Got mine today. Great job. I assume the pic has NOT been programmed. If not, when will the code be posted? Also, any news on an assembly manual? The pcb looks pretty straight forward but I don't want to screw it up. Thanks again.
The Pic is not programmed. I don't even have the firmware. I don't know when the assembly manual or the firmware will be posted.
Rick
No sweat, just curious. I have plenty to do before I need to assemble these. Thanks again for your efforts.
-
Hi Rick
I got my DSC's today
Awesome job on packing them and doing a Great job on the coop
Many thanks
Just in case people didn't see it.
I did post the firmware to the wiki and hopefully will have the manual asap.
Rick R.
-
Mine arrived today too.
-
hello Rick
received my package, great job of packing.
Hope things are going better for you.
Take care
Jess
-
Mine arrived. And THANK YOU. THe quality of the COOP is top notch.
-
Mine came today too.
They even came with a little packet of candy next to the boards. Didn't taste too good and dried out my mouth. ;D
Thanks for all the hard work.
-
Came today! Awesome job and Thanks for running this!!!!! <res.
-
Mine came today as well!! Thanks so very much!!!
Sent from my iPhone using Tapatalk
-
How did someone in Idaho get them before Arizona.....must be faster horses up there delivering.
-
Mike he might of shipped them in batches. I got mine on Monday here in Chandler, AZ.
-
Mike he might of shipped them in batches. I got mine on Monday here in Chandler, AZ.
Just wanted to get them before I left on my trip. Will have to wait now.
Oh well.
-
My also Came today! Awesome job and Thanks for running this!! 8)
-
Thank you Rick for a first class coop, from start to finish!
:) joe
-
I also got my package today :)
Thankyou for doing the coop
-
Mike he might of shipped them in batches. I got mine on Monday here in Chandler, AZ.
Just wanted to get them before I left on my trip. Will have to wait now.
Oh well.
Mike,
According to the tracking information, your package was delivered today. Did you not receive it?
Thanks,
Rick
-
Got mine today, and assembled. thanks!
-
I may have checked the mailbox prior to it being dropped off. Will check first thing in the morning and report back.
Things may be perfect before I leave after all.
-
Hi Rick
I got my DSC's today
Awesome job on packing them and doing a Great job on the coop
Many thanks
Just in case people didn't see it.
I did post the firmware to the wiki and hopefully will have the manual asap.
Rick R.
Manual updates are looking great!
For Step 16, I think you should update the text and perhaps the photo to indicate that the shunt needs to be installed on both pins to program and then removed when done. An easy detail to overlook when things aren't working right.
-
Recieved Mine today great job packing and THANKS for doing the COOP
-
Miike
Great job.
mine arrived yesterday
thanks again
-
Got mine yesterday. I have to say Richard, that I have had two COOPs with you this year and each time your package has come in everything is packed AWESOME! It's very well packed and labeled and just superb! <res.
Thanks for going the extra mile for us sir!
-
Got mine today, and assembled. thanks!
Show off!! >:D
-
Yea, what he din't tell you was that he got his wife to build it for him. >:D >:D >:D
-
Please do not post questions or your thoughts in the coop thread. Start a new thread in the correct area for these. Coop threads are strictly for people requesting kits.
I was only posting that i received mine.
P.S. i only had 8, so it didn't take too long to solder them.
-
I received mine too.
Thanks for all of the work in putting this coop together!!
-
Got it. Thanks
-
I may have checked the mailbox prior to it being dropped off. Will check first thing in the morning and report back.
Things may be perfect before I leave after all.
Package was in the mail. Sorry for the mess up there....dont panic.
Looks awesome. Thank you for running the coop.
MH
-
my order arrived today. Awesome job packing the kits. Thank you for running this coop. <res.
-
Got mine too. Great job and thanks for all the hard work!
Sent from my Motorola Atrix2 via Tapatalk 2
-
Great job. Got my stuff yesterday.
Thanks for the effort. It is really appreciated.
Thanks,
Rick S