DiyLightAnimation
Store => Finished COOPS => Topic started by: Rainlover on September 04, 2012, 08:04:11 pm
-
Please Read Completely before you post in this coop!
This is a coop for the Lynx Express Controller. This will be the fourth coop for 2012. The coop will have a hard limit of 100 units and will close once this is reached or on the 16th of September at 8:00 pm P.S.T. whichever comes first.
To assist in insuring everyone gets the chance to at least get some units, we will limit the number per user to 6 units for the first 96 hours. After which I will post that we will accept higher counts. At that time you will be able to increase your order if you wish to, beyond 6 units until the 100 unit limit is reached.
Remember purchasing kits for the purpose to put them up for sale is not allowed. Anyone found to be doing this will be banned from all coops in the future.
You will receive all the parts you need for the complete kit. To complete your setup you will need a case of some type, power cords for the AC hookup and a DMX dongle to use along with the software programs.
By joining this Coop you also agree that the Coop manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Coop at your own risk.
As with any Coop this Coop is subject to the forum rules. These rules can be reviewed using the following link.
Forum Coop rules
http://diylightanimation.com/index.php?topic=111.0
Now for the pricing.
We have a base goal of 50 kits. This goal allows the cost per unit to drop low enough to make it cost effective to run the coop. below this number we will not make the order.
Pricing is below broken into the 100 unit levels. The pricing below will include all fees, shipping and handling charges to get the items to the Coop Manager.
*****100 Kit Level*****
Lynx Express Complete Kit /w heatsink (No Case) $67
This is an estimate only.
PICs will not be pre-programmed in this coop
Post with the quantity you wish in this thread. Coop threads are strictly for people requesting orders. If you later wish to change your quantity please post again clearly stating that this is an update to a previous order and how many you wish it to be now.
For new users you do not pay for a coop until it closes and the coop manager sends you a private message on the forum telling you how much and what to do to pay.
Please be ready to pay as soon as this coop closes. We want to get the parts ordered, received, sorted and shipped as soon as possible in order to get these to you in time for your Christmas setup. You will only have a few days to get your payment in before you are removed from the coop for lack of payment.
If you have any questions please post a new thread in the appropriate forum or send me a PM to help keep the coop thread clean.
John
-
| Member Name | ordered | Paid |
| Mike Hill | 2 | x |
| khague | 2 | x |
| mmorlan62 | 1 | x |
| MSL | 2 | x |
| zac_cutt | 3 | x |
| Kappa2006 | 1 | x |
| rrawlings | 2 | x |
| keithr | 1 | x |
| Tigman009 | 2 | x |
| onesmoothhead | 2 | x |
| bajadahl | 1 | x |
| cooljd | 1 | x |
| Dennis Cherry | 1 | x |
| smeighan | 2 | x |
| bjmckenz | 2 | x |
| lashbyrn | 1 | x |
| edwinpeek | 2 | x |
| ChristmasattheY | 7 | x |
| cody33rd | 3 | x |
| Ozmin | 2 | x |
| ms5435 | 1 | x |
| NavyGator | 2 | x |
| lorajoslyn | 1 | x |
| lucky2710 | 1 | x |
| devoidelk | 1 | x |
| Michael Munch | 6 | x |
| kauthier | 2 | x |
| Watsont79 | 1 | x |
| asylvest | 2 | x |
| nvizzini | 1 | x |
| t.jo13 | 2 | x |
| dvelez1985 | 1 | x |
| bisquit475 | 3 | x |
| ratoder | 1 | x |
| | | |
| | | |
| | | |
| Total : | 65 | |
-
John,
Please add two (2) for me.
Thank you for taking the time to run the coop.
Mike H
-
2 please.
Thank you to all who make this happen.
-
1 please
-
Please put me down for 2.
Thanks for running the coop.
Rich
-
I'll take 3 please !
Thanks!
Zac
-
Ill take 1 please.
-
Put me down for (2) please.
Thanks for your efforts
-
I would like 1
-
Put me down for two. thanks
-
I would like 2 please
Sent from my iPad using Tapatalk HD
-
1 Please, Thank You
-
Put me down for one.
Thank you for doing this coop.
Jim
-
1 for me, please
-
I would like 2
Thanks, sean
-
3 for me kevin
-
I'll take 2, please.
-
1 please
-
I will take 1..(But dont tell my wife!)
-
put me in for 2 kits please
-
Limit of 6 please. Shipping cost?
-
Limit of 6 please. Shipping cost?
6 should fit in a medium flat rate box. Shipping would be $11.35. Insurance would be extra if you want it..
John
-
I am removing the limit of 6 controllers.
Order as many as you need.
Thanks for your participation in this coop.
John
-
I would like 2.
Thank you
-
I would like 2 please....
Thanks - Bill A.
-
put me down for 1. thanks.
-
sorry to be wishy-washy....
I would like to withdraw my request
I think i'm in over my head as it is... lol :o
-
I will take 2 please.
Thanks for doing the coop.
MSL
-
1 for me, please!
-
Please sign me up for 1. Thanks
-
1 for me please. And is it possible to get another set of just parts no pcb?
-
1 for me please. And is it possible to get another set of just parts no pcb?
Sorry, we are only doing complete kits.
John
-
Ty thought id atleast ask
-
1 for me please. And is it possible to get another set of just parts no pcb?
It is actually cheaper buying a complete kit from coop than just parts. :)
-
2 please
-
I just didn't wanna let the pcb i had go to waste so i'll hang onto it till i upgrade my iron to a better weller one.
-
6 for me - thanks
-
Please mark me down for 2 kits. Thank you.
-
put me in for 1 please
-
2 days left.
This is the last LE coop of the year.
John
-
Two please!
-
one please
-
One please. Thank goodness I decided to check the forum today.
-
aw heck put me down for 2 please will give daughter spares
Thankyou for doing coop
-
One please. I have a question though I want to do a talking face as my first project. Will one be enough?
-
One please. I have a question though I want to do a talking face as my first project. Will one be enough?
Yes, 16 channels should be more than enough for one talking face.
Most channels used will be for the different mouth movements. most faces are 8 channels with 5 for the mouth.
It is up to you how many different things you want the face to do.
-
One please. I have a question though I want to do a talking face as my first project. Will one be enough?
Yes, 16 channels should be more than enough for one talking face.
Most channels used will be for the different mouth movements. most faces are 8 channels with 5 for the mouth.
It is up to you how many different things you want the face to do.
Sounds good thank you.
-
Please add 1 more for me. bringing my total up to 3.
Thank You!
-
I would like1 please
-
This coop is now closed for orders.
I will update the purchase list and start getting quotes tomorrow.
John
-
I have updated the purchase list on the second post of this topic. Please check and make sure the quantity you ordered is correct. If it is not correct, please send me a PM with the correct quantity.
Thank you for participating in this coop.
John
-
If you have purchased kits in this coop and you are not in the US, please let me know ASAP so I can calculate your shipping charges.
Quotes are all in. I should be able to get out payment PMs in the next day or so.
Thank you for participating in this coop.
John
-
Payment PMs have been sent.
Currently, all of the parts are available from 2 suppliers. The sooner you send payment, the sooner we can order parts, get them sorted and shipped out.
If you have any questions, send me a PM.
Thanks for participating in this coop.
John
-
Payment sent.
Thank you John for running this coop.
-
Payment sent!
Thank you!
Jim
-
Payment sent
Thanks for doing the coop.
Mark
-
We are over halfway on payments received.
John
-
Update.
23 people have paid. 14 left to go. 1 week left to pay.
Reminders for those that have not paid iwill go out in the next couple of days.
Thanks for partipating in this coop.
John
-
payment sent
-
Payment sent,
Sorry for the delay.
Thanks for running this COOP!
-
John,
Thanks for running the COOP.
Rich
-
Payment deadline has come and gone. We had a few people drop out or not pay but it won't affect the cost of the kits.
Some parts have been ordered. I will order the rest of the parts tomorrow.
Thanks for participating in this coop.
John
-
Are you going to open the other kits up to sell them to anyone?
-
Are you going to open the other kits up to sell them to anyone?
Short answer - No.
Long answer - There is not a significant difference in price between 65 and 71 kits. I want to get the parts ordered and shipped so everyone can have their kits ASAP.
John
-
The parts have been shipped from Mouser and Digikey. They should be here next week. Sorting will start as soon as they get here. Elf 12 will not be allowed to help with this coop. It is hard for him to count to 10 since he lost his finger in the reindeer training incident
John
-
Thanks for the update. Hopefully Elf 12 and the reindeers will fully recover.
MSL
-
Update.
All parts have arrived except the pcbs and heat sinks. Sorting has started.
John
-
Ty for the update rain can't wait to build it.
Todd
-
Weekly update.
All of the parts are sorted. As soon as the pcbs and heat sinks show up, we will start shipping.
John
-
PCBs just arrived and I will be sorting the hardware and packing to send them to the coop manager as soon as I get the conductor pcbs packed.
RJ
-
Update.
Pcbs and heat sinks arrived today. Packaging is started. I seem to have lost my big stack of newspapers tha I use for packing. Will finish packing tomorrow and hopefully start shipping.
John
-
Update.
Everything is boxed up. I will get the labels printed and take everything to the post office tomorrow.
John
-
Thanks for all your hard work
-
thanks for all your work
Nicholas
-
All of the packages went to the post office this morning. If there is any problems with your kits, send me a pm. I expect there will be a lot of solder smoke this weekend.
John
-
Got my notice. Thanks John.
-
Got my notice as well. Thank you!
Jim
-
Package received...
Ty for everything john.
Todd
-
Got the package today....that was quick.
Thank you John.
-
Got the package today....that was quick.
Thank you John.
It's all downhill from Oregon to Arizona.
John
-
Got mine yesterday in the mail; Thank you for running this CO-OP...
-
Got mine. Thanks for doing the coop
-
Hi John
Got mine. Thanks for doing the coop.
Nicholas
-
Got my package.
Thanks for all your hard work.
MSL
-
The mailman left me a package :)
Thankyou for doing the coop
-
John,
Thanks!! I got my package yesterday and plan on some assembly time this weekend (wife permitting).
Enjoy the builds everyone!!!
Rich
-
Got mine yesterday... built it yesterday and today. Successful test of my first DIY board.....
Thanks again for running the coop.
-
I put everything together and I tested it before I put the ICs and the 3.3 and 5 volt lit up but when I put all the ICs in and plug it in again the 6th channel led lights up as well. Is that normal?
-
I put everything together and I tested it before I put the ICs and the 3.3 and 5 volt lit up but when I put all the ICs in and plug it in again the 6th channel led lights up as well. Is that normal?
Did you program the pic?
John
-
I put everything together and I tested it before I put the ICs and the 3.3 and 5 volt lit up but when I put all the ICs in and plug it in again the 6th channel led lights up as well. Is that normal?
Did you program the pic?
John
I haven't yet.