DiyLightAnimation

Hardware => Lynx EtherDongle => Lynx Conductor => Topic started by: RJ on September 29, 2012, 09:47:18 pm

Title: Draft Conductor / Slave Assembly Manual
Post by: RJ on September 29, 2012, 09:47:18 pm

Very Rough, Feel free to work with Ricky to Clean it up and get it posted to the Wiki.

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: rrowan on September 29, 2012, 10:04:09 pm

Nice job

I assume the white wires are for the trigger pcb, at the end of the manual

Rick

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: RJ on September 29, 2012, 11:13:13 pm

Roger, Doger! 
Wiki Ricky!

 :D
RJ

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: Night Owl on September 29, 2012, 11:28:42 pm

Woo hoo!  Exciting to see what the Conductor looks like!  I have two suggestions:

1) Page 9, second paragraph, second sentence: "boths" should be "bolts"
2) May want to mention that the ICSP header pins on the EtD will have to be bent over.

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: rrowan on September 30, 2012, 12:16:44 am

Thanks Night Owl

I corrected the typo but I need to add the bit about the the ICSP header.

Rick R.

http://www.diylightanimation.com/wiki/index.php?title=Manual_Conductor

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: mokeefe on September 30, 2012, 09:22:50 am

Well done on the manual. It's straightforward and clear.

I made a handful of typo and grammar fixes in the Wiki itself.  Hopefully I didn't step on anyone's toes.

Might be nice if the photos could display in larger sizes when clicked on (like in other manuals), but I suspect this is due to the issue with the image plug-in that I discovered when working on another manual.

-Mike

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: rrowan on September 30, 2012, 10:08:07 am

The image plugin for the wiki has been fixed.

I grab the images from RJ's doc file and I am hoping to get the originals so we can get larger pictures in the wiki.

Rick R.

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: mokeefe on September 30, 2012, 10:19:47 am

You are not allowed to view links. Register or Login

The image plugin for the wiki has been fixed.
Rick R.

Ah, good to know.  Maybe I'll go back and adjust some of the images in the other manuals I worked on.  Thanks.

-Mie

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: RJ on September 30, 2012, 12:03:00 pm

images at 800 x 5??

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: RJ on September 30, 2012, 12:04:02 pm

more

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: RJ on September 30, 2012, 12:04:56 pm

More

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: RJ on September 30, 2012, 12:05:42 pm

last

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: rrowan on September 30, 2012, 03:30:01 pm

Thanks RJ

I updated the wiki manual with the new pictures

Rick R.

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: mokeefe on September 30, 2012, 05:20:38 pm

I made most of the same changes to the Slave manual as I did to the Conductor manual.  Might tweak it a bit more once I have the actual board and parts in hand to do the build.

-Mike

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: sabie on October 01, 2012, 09:10:40 am

geat job on the assemble manuals thanks

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: rdebolt on October 01, 2012, 06:01:17 pm

Great job to everyone. One question though: Is there a template for cutting the case for the ETD with the Conductor\Slave?

Title: Re: Draft Conductor / Slave Assembly Manual
Post by: tbone321 on October 01, 2012, 06:19:43 pm

Not as yet but hopefully soon.