DiyLightAnimation

Store => Finished COOPS => Topic started by: n1ist on October 04, 2012, 02:34:00 pm

Title: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on October 04, 2012, 02:34:00 pm: This Coop is for the Pixelnet Splitter.

*********************************************************************************
Please read this post completely before posting in this Coop.

This Coop will have two options. One will be for the bare PCB. The other will be for a complete kit including PCB and parts. This option will not include the case, power cord, or mounting screws. The board fits in a standard TA-200 case, the same one used for the Lynx splitter.

Information can be found here:
http://diylightanimation.com/index.php?topic=8582.30
*********************************************************************************

This Coop will close on October 14th at 8:00 PM Eastern Standard Time or if we hit 100 kits.

Full Payment is expected when the Coop is closed. No orders can be made until all members have paid. All members will receive PMs with details or will be directed by post how to pay once the Coop closes.

Please get your PayPal payments in as soon as you get the Coop invoice PM as no orders can be placed until all payments have been received.

By joining this Coop you also agree that the Coop manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Coop at your own risk.

As with any Coop, this Coop is subject to the forum rules. These rules can be reviewed using the following link.

Forum Coop rules
http://diylightanimation.com/index.php?topic=111.0

*********************************************************************************

Here is the pricing breakdown based on the initial quotes.
Pricing is in US Dollars and includes PayPal and Coop fees.

We have a base goal of 25 kits. This goal allows the cost per unit to drop low enough to make it cost effective to run the coop. Below this number we will not make the order.

Pixelnet Splitter Kit With PCB, parts.
Per Kit At Qty 25 - $25
Per Kit At Qty 50 - $20

Bare PCBs will be around $2 each.

This is an estimate. As always higher numbers reduce pricing and lower numbers increase pricing.

*********************************************************************************

US shipping will be by US Postal Service Priority Mail Flat Rate boxes. All orders should fit flat rate box. Please add $5.30 to your total.

If you are only ordering bare boards or if you are located outside the US, I will contact you with the actual shipping cost as it will likely be cheaper.

*********************************************************************************

Post with the quantity you wish in this thread. Please do not post questions or your thoughts in the coop thread. Start a new thread in the correct area for these. Coop threads are strictly for people requesting orders. If you later wish to change your quantity please post again clearly stating that this is an update to a previous order and how many you wish it to be now
Title: Re: Pixelnet splitter coop
Post by: n1ist on October 04, 2012, 02:34:27 pm: Code: You are not allowed to view links. Register or Login
Username # Kit #PCB Paid Paid shiShipped rmp2917 0 2 x x x Freebird 0 5 x x x shaunkad 0 6 x x x Rainlove 1 0 x x x mokeefe 1 0 x x x chrisatp 1 0 x x x emcee 1 0 x x x smeighan 1 0 x x x ksbcay 1 0 x x x frankr 1 0 x x x tbone321 1 0 x x x Steve Ga 1 0 x x x wildwill 1 0 x x x John K 1 0 x x x deweycoo 1 0 x x x teager23 1 0 x x x Kwajtony 1 0 x x x tlh 1 0 x x x Dennis C 1 0 x x x Mike Hil 1 0 x x x mghollan 1 0 x x x MrChrist 1 0 x x x IMustang 1 0 x x x loverofl 1 0 x x x DanHoust 1 0 x x x jnealand 1 0 x x x n1ist 1 0 x x x bcstuff 1 1 x x x gophergr 1 1 x x x Danbe 1 1 x x x mykroft 1 1 x x x keithr 1 1 x x x Sly 1 1 x x x randyy 1 1 x x x pk 1 1 x x x kj77rn 1 1 x x x dpitts 1 1 x x x richagem 1 2 x x x gforman 1 2 x x x odlids 1 2 x x x taybrynn 1 2 x x x monkey14 1 2 x x x KeithTar 1 5 x x x jess_her 1 5 x x x JoeFromO 2 0 x x x Ron 2 0 x x x JerryPla 2 0 x x x austinda 2 0 x x x Pete 2 0 x x x lighting 2 0 x x x lonewolf 2 0 x x x deplanch 2 0 x x x CW 2 0 x x x Nightowl 2 0 x x x pete pet 2 0 x x x curtbl 2 0 x x x dcwehw99 2 0 x x x Jeffl 2 0 x x x edwinpee 2 1 x x x vairmoos 2 1 x x x Ozmin 2 2 x x x rdebolt 2 2 x x x tmcteer 2 2 x x x Voltorb 2 3 x x x davron12 2 10 x x x travaile 5 0 x x x combusti 4 10 x x x Total 92 74 67 67 67
Title: Re: Pixelnet splitter coop
Post by: richagem on October 04, 2012, 02:41:14 pm: I'd like one kit please.

Thanks,
Rich
Title: Re: Pixelnet splitter coop
Post by: tbone321 on October 04, 2012, 02:42:55 pm: Put me in for 1
Title: Re: Pixelnet splitter coop
Post by: JoeFromOzarks on October 04, 2012, 02:43:07 pm: QTY 2 of the kit please.

Thank you for running this coop!

:) joe
Title: Re: Pixelnet splitter coop
Post by: Ron on October 04, 2012, 02:43:50 pm: One kit please.

Ron
Title: Re: Pixelnet splitter coop
Post by: Rainlover on October 04, 2012, 02:49:53 pm: 1 kit for me please.

Thanks for doing this coop Mike.

John
Title: Re: Pixelnet splitter coop
Post by: mokeefe on October 04, 2012, 03:00:02 pm: I'd like 1 Kit Please.

Thanks.

-Mike
Title: Re: Pixelnet splitter coop
Post by: JerryPlak on October 04, 2012, 03:02:11 pm: QTY 2 of the kit please.

Thank you for running this coop!

JerryPlak
Title: Re: Pixelnet splitter coop
Post by: chrisatpsu on October 04, 2012, 03:02:53 pm: Qty 1 please
Title: Re: Pixelnet splitter coop
Post by: emcee on October 04, 2012, 03:03:20 pm: 1kit (PCB + parts)

Sent from my SPH-D700 using Tapatalk 2
Title: Re: Pixelnet splitter coop
Post by: austindave on October 04, 2012, 03:08:51 pm: Two kits (PCB + parts) for me, please.

Thanks,
Dave (austindave)
Title: Re: Pixelnet splitter coop
Post by: chrisatpsu on October 04, 2012, 03:10:59 pm: haha, i meant one kit please.

i didn't know there was a board only option.
Title: Re: Pixelnet splitter coop
Post by: n1ist on October 04, 2012, 03:18:12 pm: Just to make it clear, there are two options for this coop:

Bare PCB (just the board, nothing else)
Complete Kit (The board, and all of the parts)

/mike
Title: Re: Pixelnet splitter coop
Post by: bcstuff on October 04, 2012, 03:26:08 pm: I will take:

1- Complete Kit (pcb + parts)
1- Bare pcb board

Thanks Mike for creating and running this!
Brian
Title: Re: Pixelnet splitter coop
Post by: smeighan on October 04, 2012, 03:27:09 pm: 1 kit (PCB + parts)

thanks
sean
Title: Re: Pixelnet splitter coop
Post by: KeithTarpley on October 04, 2012, 03:31:59 pm: Greetings,,,

Please add me for 1 complete kit,

And 5 bare pcbs.

Thanks.

Keith
Title: Re: Pixelnet splitter coop
Post by: kenjreno on October 04, 2012, 03:35:24 pm: I'll take 2 kits.
Title: Re: Pixelnet splitter coop
Post by: Pete on October 04, 2012, 03:35:56 pm: please put me down for 2 kits

thank you,
pete
Title: Re: Pixelnet splitter coop
Post by: gforman on October 04, 2012, 03:36:08 pm: please put me down for

2 Bare PCB
1 Complete Kit

thanks for running this coop

Glen
Title: Re: Pixelnet splitter coop
Post by: Ozmin on October 04, 2012, 03:43:56 pm: Put me down for the following:

2 Bare PCB's
2 Complete Kits

Thanks - Bill A.
Title: Re: Pixelnet splitter coop
Post by: ksbcay on October 04, 2012, 03:47:48 pm: I'm take one Complete Kit

thanks
Title: Re: Pixelnet splitter coop
Post by: gophergrove on October 04, 2012, 03:51:59 pm: 1 complete kit (pcb & parts)
1 bare board

Thanks.
Title: Re: Pixelnet splitter coop
Post by: lightingboy82 on October 04, 2012, 03:59:19 pm: I would like 2 complete kits please
Title: Re: Pixelnet splitter coop
Post by: Danbe on October 04, 2012, 04:06:30 pm: 1- Complete Kit (pcb + parts)
1- Bare pcb board

Thank
Title: Re: Pixelnet splitter coop
Post by: frankr on October 04, 2012, 04:09:05 pm: 1 - complete kit
Title: Re: Pixelnet splitter coop
Post by: odlids on October 04, 2012, 04:17:04 pm: Please put me down for

2 x Bare PCBs

Thanks

Odlid Dave
Title: Re: Pixelnet splitter coop
Post by: rmp2917 on October 04, 2012, 04:22:05 pm: 2 bare PCBs please

Thanks
Title: Re: Pixelnet splitter coop
Post by: tbone321 on October 04, 2012, 04:26:27 pm: Ignore my previous absent minded post and make that 1 kti please
Title: Re: Pixelnet splitter coop
Post by: lonewolf41 on October 04, 2012, 04:28:57 pm: Two (2) complete kits please.

Thanks,
-Keith
Title: Re: Pixelnet splitter coop
Post by: mykroft on October 04, 2012, 04:36:58 pm: 1- Complete Kit (pcb + parts)
1- Bare pcb board

thanks
Myk
Title: Re: Pixelnet splitter coop
Post by: deweycooter on October 04, 2012, 04:38:02 pm: 1 please.
Title: Re: Pixelnet splitter coop
Post by: rdebolt on October 04, 2012, 04:38:43 pm: Qty 2 -Kits
Qty 2 - boards please!
Title: Re: Pixelnet splitter coop
Post by: Steve Gase on October 04, 2012, 04:48:49 pm: 1 kit (PCB + parts)

Thanks!
Steve
Title: Re: Pixelnet splitter coop
Post by: travailen on October 04, 2012, 04:51:51 pm: 2 Kits (PCB + Parts)

Thanks,

Rick S
Title: Re: Pixelnet splitter coop
Post by: wildwillie on October 04, 2012, 05:23:34 pm: 1 kit (PCB + parts)

Thanks for doing this!
Title: Re: Pixelnet splitter coop
Post by: Voltorb on October 04, 2012, 05:24:16 pm: 2 kits, and 3 bare pcb's please. Thank you!
Title: Re: Pixelnet splitter coop
Post by: John K on October 04, 2012, 06:46:25 pm: 1 kit (PCB + parts)

Thanks

John K
Title: Re: Pixelnet splitter coop
Post by: dpitts on October 04, 2012, 08:20:59 pm: 1 kit (PCB + parts)

Thanks
Title: Re: Pixelnet splitter coop
Post by: teager23336 on October 04, 2012, 08:53:28 pm: 1 kit (PCB + parts)
Title: Re: Pixelnet splitter coop
Post by: Ron on October 04, 2012, 09:39:02 pm: Can you update me to 2 kits please? I hate to be without a spare.

Ron
Title: Re: Pixelnet splitter coop
Post by: deplanche on October 04, 2012, 09:53:22 pm: 2 kits please
Title: Re: Pixelnet splitter coop
Post by: Kwajtony on October 05, 2012, 12:11:58 am: okay, i think I need just one kit please.
Title: Re: Pixelnet splitter coop
Post by: pk on October 05, 2012, 12:53:23 am: 1 kit (PCB + parts)
Title: Re: Pixelnet splitter coop
Post by: CW on October 05, 2012, 01:46:41 am: I would like 2 complete kits please.
Thanks,

Craig
Title: Re: Pixelnet splitter coop
Post by: keithr on October 05, 2012, 01:57:52 am: 1- Complete Kit (pcb + parts)
1- Bare pcb board

Thank you
Title: Re: Pixelnet splitter coop
Post by: jess_her on October 05, 2012, 02:41:49 am: Hello Mike
I would like 1 full kit and 1 PCB

thanks for doing this

Jess
Title: Pixelnet splitter coop
Post by: tlh on October 05, 2012, 06:27:16 am: 1 kit (PCB + parts), please.
Thanks!

Sent from my iPhone using Tapatalk
Title: Re: Pixelnet splitter coop
Post by: edwinpeek on October 05, 2012, 08:28:47 am: qty 2 kits
qty 1 bare pcb

please and thanks
Title: Re: Pixelnet splitter coop
Post by: Dennis Cherry on October 05, 2012, 09:17:36 am: 1 kit please.
Title: Re: Pixelnet splitter coop
Post by: travailen on October 05, 2012, 09:33:30 am: I previously asked for 2 kits (PCB and parts)
Please change the quantity to FIVE kits (PCB and parts)

Thanks,

Rick S
Title: Re: Pixelnet splitter coop
Post by: davron12 on October 05, 2012, 11:02:10 am: 2 kits
10 boards

Thank you
Title: Re: Pixelnet splitter coop
Post by: Freebird on October 05, 2012, 11:36:44 am: PCB only qty 5 Thanks!!!
Title: Re: Pixelnet splitter coop
Post by: Nightowlz1966 on October 05, 2012, 12:25:52 pm: I will take (2) of the kits
Title: Re: Pixelnet splitter coop
Post by: Sly on October 05, 2012, 01:03:39 pm: Please put me down for

1-Complete Kit
1-PCB

Thanks,
Sly
Title: Re: Pixelnet splitter coop
Post by: randyy on October 05, 2012, 01:36:54 pm: 1 kit and 1 PCB for me, please.

Thanks
Title: Re: Pixelnet splitter coop
Post by: Mike Hill on October 05, 2012, 01:42:48 pm: I guess I better get in on this one.

I will take 1 kit
Title: Re: Pixelnet splitter coop
Post by: pete peters on October 05, 2012, 02:16:20 pm: Please put me in for TWO (2) complete kits

Thanks Much
Title: Re: Pixelnet splitter coop
Post by: mgholland on October 05, 2012, 04:22:09 pm: 1 kit (PCB + parts)

thanks
Title: Re: Pixelnet splitter coop
Post by: odlids on October 05, 2012, 05:26:45 pm: I would like to update my order to

1 x Complete Kit

2 x Bare PCBs

Thankyou

Odlid Dave
Title: Re: Pixelnet splitter coop
Post by: curtbl on October 05, 2012, 08:19:58 pm: 2 complete kits please... This is a great add to help the load of many to many hubs. Thanks for getting this in time for the season.. <res.
Thanks
Curtbl
Title: Re: Pixelnet splitter coop
Post by: MrChristmas2000 on October 05, 2012, 08:25:06 pm: 1- Complete Kit (pcb + parts)
Title: Re: Pixelnet splitter coop
Post by: IMustangI on October 05, 2012, 09:15:24 pm: Count me in for one kit.
Title: Re: Pixelnet splitter coop
Post by: n1ist on October 05, 2012, 09:46:40 pm: Just a heads up - we are at 75 kits right now and the coop will close at 100, so if you are thinking of joining, do it soon.
/mike
Title: Re: Pixelnet splitter coop
Post by: tmcteer on October 05, 2012, 11:18:02 pm: 2 complete kits
2 pbs

Thanks Mike
Title: Re: Pixelnet splitter coop
Post by: combustionmark on October 06, 2012, 08:47:43 am: Put me down for 4 of kit 1 and 10 of kit 2.

Thanks
Title: Re: Pixelnet splitter coop
Post by: jess_her on October 06, 2012, 10:31:18 am: Sorry Mike changed my mind

Can you add 4 PCB please

Jess
Title: Re: Pixelnet splitter coop
Post by: taybrynn on October 06, 2012, 12:42:59 pm: 1- Complete Kit (pcb + parts)
2- Bare pcb boards

Thanks in advance !

Scott
Title: Re: Pixelnet splitter coop
Post by: dcwehw99 on October 06, 2012, 01:11:53 pm: 2 complete kits

Thanks
Denny
Title: Re: Pixelnet splitter coop
Post by: mykroft on October 06, 2012, 04:14:47 pm: Mine is listed incorrectly on 2nd post

quoted my order again below

Thanks
Myk

You are not allowed to view links. Register or Login
1- Complete Kit (pcb + parts)
1- Bare pcb board

thanks
Myk
Title: Re: Pixelnet splitter coop
Post by: loveroflife96 on October 07, 2012, 12:42:28 am: Put me down for 1 complete kit :-) Thanks for doing the CoOp!
Title: Re: Pixelnet splitter coop
Post by: monkey141 on October 07, 2012, 12:24:44 pm: Thanks for running this Coop.

May I please have:

Kits - 1
PCB's - 2

Thanks,
Mike
Title: Re: Pixelnet splitter coop
Post by: kenjreno on October 08, 2012, 12:05:22 pm: I need to cancel the order I have for 2 Kits.
Thanks
Title: Re: Pixelnet splitter coop
Post by: shaunkad on October 08, 2012, 05:20:11 pm: I would like 4 pcbs
Title: Re: Pixelnet splitter coop
Post by: pk on October 09, 2012, 12:11:07 am: 1 - Complete kit (PCB + parts)
1 - blank pcb
Title: Re: Pixelnet splitter coop
Post by: DanHouston on October 09, 2012, 12:51:31 am: Put me down for 1 complete kit.
Title: Re: Pixelnet splitter coop
Post by: kj77rn on October 09, 2012, 10:39:37 am: 1 Kit and 1 PCB, please.
Title: Re: Pixelnet splitter coop
Post by: dpitts on October 09, 2012, 05:56:27 pm: Can you add 1 pcb to my order for a total of...

1 - pcb and parts kit
1 - pcb only

Thank you.
Title: Re: Pixelnet splitter coop
Post by: vairmoose on October 10, 2012, 01:10:25 pm: Please add me into the COOP:

2 - pcb and parts kit
1 - pcb only

Thank you.

Larry
Title: Re: Pixelnet splitter coop
Post by: richagem on October 10, 2012, 06:44:16 pm: I'd like to update my order. My previous order was for one complete kit. I'd like to add 2 PCBs as well.

Thanks,
Rich
Title: Re: Pixelnet splitter coop
Post by: shaunkad on October 10, 2012, 06:45:54 pm: I would like to update mine to 6 pcbs as well.
Title: Re: Pixelnet splitter coop
Post by: dpitts on October 12, 2012, 01:49:41 am: Thanks for updating ny order. I did notice I am listed twice. The second entry has correct quantities. Thank you.
Title: Re: Pixelnet splitter coop
Post by: pk on October 12, 2012, 10:03:23 am: I just noticed I posted twice and ordered kits in both posts!! duh..

My correct order is the second post which is 1 complete kit and 1 blank pcb

Sorry for the confusion.
Title: Re: Pixelnet splitter coop
Post by: n1ist on October 13, 2012, 07:35:26 pm: Just a reminder - the coop closes tomorrow (10/14) at 8PM EDT
/mike
Title: Re: Pixelnet splitter coop
Post by: jnealand on October 13, 2012, 09:19:02 pm: One complete kit please
Thanks, I've been on the fence about this and not sure I need it, but the price looks ok so here we go.
Title: Re: Pixelnet splitter coop
Post by: Jeffl on October 14, 2012, 07:54:21 pm: Time to experiment. I'm in for 2 kits.
Title: Re: Pixelnet splitter coop
Post by: n1ist on October 14, 2012, 08:13:12 pm: The coop is now closed.

Please check your order in the second post and let me know if there are any errors.

Status as of 10/14:

Done:
- Order flat-rate boxes from post office
- Coop has closed
To do:
- Verify pricing on parts
- Verify pricing on PCBs
- Send PMs for payment
- Wait for payment
- Order parts
- Order PCBs
- Sort parts
- Package
- Send PM for postage payment for DX and PCB-Only
- Ship
Title: Re: Pixelnet splitter coop
Post by: odlids on October 15, 2012, 04:26:48 pm: It appears I am on the list twice.

I would like 1 x full kit and 2 x PCBs

Thanks

Odlid Dave
Title: Re: Pixelnet splitter coop
Post by: n1ist on October 16, 2012, 03:40:06 pm: Request for quotes have been sent out for PCBs and parts to the vendors. As soon as I get them back, I'll figure out the final total. One item is back-ordered (the transformers; we must have bought them out for the SSR4 and DMX splitter coops...) but they have a 2-week leadtime on it so it won't delay things too much.
/mike
Title: Re: Pixelnet splitter coop
Post by: Nightowlz1966 on October 17, 2012, 01:50:07 pm: Shouldn't this coop reflect as CLOSED for orders ??
Title: Re: Pixelnet splitter coop
Post by: n1ist on October 17, 2012, 09:02:58 pm: It should. I had to figure out how to change the subject of the thread.
/mike
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Mike Hill on October 17, 2012, 11:31:32 pm: Is the list even updated on the second post?
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Mike Hill on October 17, 2012, 11:32:30 pm: disregard last message....it appears to be current
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: jnealand on October 18, 2012, 10:32:20 am: You are not allowed to view links. Register or Login
It should. I had to figure out how to change the subject of the thread.
/mike

For everyone's knowledge - If you started a thread you can go back to the first post you made and edit the topic line. But only the one who created the topic can do that -other than a moderator/admin.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on October 19, 2012, 01:15:05 pm: Status as of 10/19:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Sent request for quote for PCBs. Still waiting response.

To do:
- Send PMs for payment
- Wait for payment
- Order parts
- Order PCBs
- Sort parts
- Package
- Send PM for postage payment for DX and PCB-Only
- Ship
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on October 23, 2012, 01:38:20 pm: All quotes are in. As mentioned, a few parts had gone up since the original coop posting. The totals came to:

PCB - $2.25
Kit incl. PCB - $22.00
including Paypal and Coop fees.

Payment PMs have gone out. A few notes on the PMs:

- I accidentally sent out a PM for the people ordering one kit and no boards with the wrong totals. It was followed up by a PM with the right total and a big note in the subject/body. The total for one kit and no boards is $22.00

- For people getting 1 board and 1 kit, the totals were correct ($24.25) but the count was off in the PM (it listed 1 kit/no board)

- The bottom of the PM asked to put a note in the paypal message that the payment is for the DSC coop. It's for the pixelnet splitter coop; I copied the message from the DSC one and forgot to change that in one place
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: combustionmark on October 23, 2012, 01:58:22 pm: Payment sent.

Thanks for the coop.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: JerryPlak on October 23, 2012, 03:12:04 pm: Payment sent.

Thanks for the coop.
:)
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: tmcteer on October 23, 2012, 03:20:21 pm: Payment sent...

Thanks for running the coop Mike

Tom :)
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: tbone321 on October 23, 2012, 03:59:36 pm: Payment sent

thanks again
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Ozmin on October 23, 2012, 05:30:05 pm: Payment sent...

Thanks for running the coop Mike

Bill A.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: jnealand on October 23, 2012, 09:55:14 pm: payment sent
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: keithr on October 24, 2012, 12:12:07 am: payment sent

Thank you
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: ksbcay on October 24, 2012, 09:39:22 am: payment sent

Thank you
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on October 24, 2012, 08:00:10 pm: Status as of 10/24:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Received quote for PCBs.
- Sent PMs for payment
- Ordered parts. There are two parts that are backordered but should be shipped on 11/5

To do:
- Wait for payment. We have 20 people left to pay.
- Order PCBs
- Sort parts
- Build one and take pictures for manual
- Package
- Send PM for postage payment for DX
- Ship
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: rdebolt on October 25, 2012, 09:56:03 am: Payment Sent. Thanks Mike!
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Pete on October 25, 2012, 03:44:51 pm: Payment sent
Thanks for running the coop.

Pete
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: pete peters on October 25, 2012, 04:08:05 pm: Mike Payment is sent Today! Sorry for the GOOF! <fp. THANKS for ALL the hard Work!!!
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on October 26, 2012, 02:50:49 pm: Status as of 10/26:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Received quote for PCBs.
- Sent PMs for payment
- Ordered parts. There are two parts that are backordered but should be shipped on 11/5
- Order PCBs

To do:
- Wait for payment.
- Sort parts
- Build one and take pictures for manual
- Package
- Send PM for postage payment for DX
- Ship

Now to sit back and wait for the PCBs and backordered parts. At least I should be able to start sorting some of the parts berfore then, but unfortunately the anti-static bags are coming in with the backordered transformers...
/mike
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: wildwillie on October 26, 2012, 06:23:50 pm: $$ sent.

Thanks for running this!
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Danbe on October 26, 2012, 07:49:23 pm: Payment Sent. Thanks Mike!
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: randyy on October 27, 2012, 12:51:30 am: Payment sent. Thanks
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on October 27, 2012, 09:07:00 am: I'm still waiting on 6 payments...
/mike
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Mike Hill on October 29, 2012, 11:10:07 am: Payment sent. Not like me to be one of the last. Been out of town with all the campaigning that is going on.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: shaunkad on October 29, 2012, 11:15:27 am: paid
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on October 29, 2012, 05:51:20 pm: The first batch of parts showed up yesterday (not the backordered ones) so I spent today sorting them and watching the trees dance in the back yard. So far, just a few power glitches and one double-strke of a recloser but the power is holding.
/mike
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on October 30, 2012, 09:46:32 am: Status as of 10/30:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Received quote for PCBs.
- Sent PMs for payment
- Ordered parts. There are two parts that are backordered but should be shipped on 11/5
- Order PCBs
- Recieved one order of parts.
- Sorted capacitors, connectors, and diodes

To do:
- Wait for payment.
- Sort parts
- Build one and take pictures for manual
- Package
- Send PM for postage payment for DX
- Ship
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Nightowlz1966 on November 01, 2012, 07:04:06 am: Hey Mike
Payment Sent
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 01, 2012, 06:38:06 pm: All have payed. Thanks very much.

Status as of 10/31:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Received quote for PCBs.
- Sent PMs for payment
- Ordered parts. There are two parts that are backordered but should be shipped on 11/5
- Order PCBs
- Recieved one order of parts.
- Sorted capacitors, connectors, and diodes
- Wait for payment.

To do:
- Sort parts
- Build one and take pictures for manual
- Package
- Send PM for postage payment for DX
- Ship
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 05, 2012, 10:46:18 am: Update:
PCBs have shipped from Hong Kong
The backordered transformers are at Mouser
The backordered ICs are still expected at Mouser on 11/8

Status as of 11/5:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Received quote for PCBs.
- Sent PMs for payment
- Ordered parts. There are two parts that are backordered but should be shipped on 11/5
- Order PCBs
- Recieved one order of parts.
- Sorted capacitors, connectors, and diodes
- Wait for payment.

To do:
- Sort parts
- Build one and take pictures for manual
- Package
- Send PM for postage payment for DX
- Ship
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 05, 2012, 07:26:33 pm: This must make sense to someone - the boards left Hong Kong, went to Inchon, then to Kentucky and are now in Anchorage Alaska on the way to Massachusetts... Too bad they can't earn frequent flyer miles.
The tracker says they will be here tomorrow.

/mike
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: shaunkad on November 06, 2012, 08:46:55 am: You are not allowed to view links. Register or Login
This must make sense to someone - the boards left Hong Kong, went to Inchon, then to Kentucky and are now in Anchorage Alaska on the way to Massachusetts... Too bad they can't earn frequent flyer miles.
The tracker says they will be here tomorrow.

/mike

Is this usps if so know wounder there in the RED.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: davron12 on November 06, 2012, 07:24:59 pm: Ha! That sounds like most of my orders from Hong Kong. Funny this is that it is usually faster than if I were to just send a package one state over.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 07, 2012, 01:54:15 pm: The boards finished their long trek yesterday and have arrived. Still waiting on the backordered chips; they are scheduled to show up at Mouser tomorrow...
/mike
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Nightowlz1966 on November 11, 2012, 09:29:46 am: I have had great results ordering from China. I ordered one item on Friday morning around 11am and DHL said they picked it up at 1am on Saturday morning and at 8am on Monday it was in Chicago and at 11am on Monday it was sitting on my doorstep in Georgia.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 14, 2012, 09:45:08 pm: Update:
The remaining parts have arrived. I am about half-way done with the ESD bags

Status as of 11/14:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Received quote for PCBs.
- Sent PMs for payment
- Ordered parts. There are two parts that are backordered but should be shipped on 11/5
- Order PCBs
- Recieved parts.
- Sorted capacitors, connectors, and diodes
- Wait for payment.
- Half-way done sorting the ICs

To do:
- Sort parts
- Build one and take pictures for manual
- Package
- Send PM for postage payment for DX
- Ship
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 19, 2012, 05:34:08 pm: Update:
Sorting is done, shipping has started.

Status as of 11/19:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Received quote for PCBs.
- Sent PMs for payment
- Ordered parts. There are two parts that are backordered but should be shipped on 11/5
- Order PCBs
- Recieved parts.
- Sorted capacitors, connectors, and diodes
- Wait for payment.
- Sort parts
- Package

To do:
- Build one and take pictures for manual
- Send PM for postage payment for DX
- Ship
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 21, 2012, 01:59:12 pm: Update:
About half have been sent out. All of the shipping labels have been printed; I will try to get the rest out Friday unless I fall asleep after too much turkey...

I have started to add the Wiki entries for the splitter; the BOM is there, the manual will follow when I take some pictures.

Status as of 11/21:

Done:
- Order flat-rate boxes from post office. Received boxes
- Coop has closed
- Received quote for parts. Some have gone up a little.
- Received quote for PCBs.
- Sent PMs for payment
- Ordered parts. There are two parts that are backordered but should be shipped on 11/5
- Order PCBs
- Recieved parts.
- Sorted capacitors, connectors, and diodes
- Wait for payment.
- Sort parts
- Package

To do:
- Build one and take pictures for manual
- Send PM for postage payment for DX
- Ship
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 24, 2012, 08:29:06 am: I got a bunch out yesterday. Three more left. Two will unfortunately have to wait a few days as Mouser shorted me two transformers and are sending me the replacement parts. I'll get those out as soon as they show up. I should be shooting the pictures for the manual today.
/mike
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: jnealand on November 24, 2012, 09:03:25 am: Got mine in yesterdays mail. Thank you.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on November 25, 2012, 05:31:17 pm: Just in time... The assembly manual is now up in the wiki (http://www.diylightanimation.com/wiki/index.php?title=Manual_PixelnetSplitter#.27.27.27Step_8.27.27.27)

/mike
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: jess_her on November 25, 2012, 11:24:47 pm: thank's Mike
Very nice kit
It is a great asset to DLA.
Jess
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Kwajtony on November 27, 2012, 03:08:42 am: Received my order today. Thank you for doing this COOP!
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: JerryPlak on November 27, 2012, 09:01:07 am: Got mine in yesterdays mail. for doing this COOP!!
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: Rainlover on November 27, 2012, 09:19:28 am: Thanks Mike.

John
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: pk on November 27, 2012, 09:21:01 am: Received mine. Thanks for managing this coop.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: DanHouston on November 27, 2012, 09:51:53 am: Received mine. Thanks!
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: gforman on November 27, 2012, 10:00:27 am: got mine yesterday

thanks again

Glen
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: davron12 on November 27, 2012, 10:12:35 am: Got mine. Thank you. Haven't had a chance to assemble yet. Damn bad nodes are driving me nuts.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: rdebolt on November 29, 2012, 11:13:50 am: Got mine!! Thanks for sharing this!!! <res.
Title: Re: Pixelnet splitter coop *Closed for Orders*
Post by: n1ist on December 06, 2012, 10:29:58 am: The missing transformers have arrived, and the last ones have gone out today.
/mike