DiyLightAnimation

Hardware => Lynx Aeon => Topic started by: keithr on October 12, 2012, 11:24:21 pm

Title: !st Aeon Build
Post by: keithr on October 12, 2012, 11:24:21 pm

Bought this last year during a coop and just now have had the time to put it together.
Everything seemed ok until I plug it in. Solders all look good, made sure all LED's are +/- correctly.

After pluging in the wall wart I get just one green LED 2 down from the #1. No other LED on.

Any idea's are welcomed:

Thank you

Title: Re: !st Aeon Build
Post by: JonB256 on October 13, 2012, 08:10:52 am

Reflash the PIC.

Sent from my DROIDX using Tapatalk 2

Title: Re: !st Aeon Build
Post by: keithr on October 14, 2012, 10:40:27 pm

All well in Aeon.  besides the reflash. Steve Gase was a grafeful helping hand today. We checked and compaired his build with mine.

Problems:

1.  A 100uf can was in backwards quick turn around.

2. Part # 24fj32ga002 and goes in the very middle of the pcb (Failed to read that part had thought the chips had all been the same. <fp. :-[

Aeon on beat with the time.

Thank you Steve!!