DiyLightAnimation

Hardware => Bobcat DMX Tester => Topic started by: keithr on October 14, 2012, 03:03:32 am

Title: PCB's
Post by: keithr on October 14, 2012, 03:03:32 am

Is it possible to get a PCB and order parts?

Title: Re: PCB's
Post by: sabie on October 14, 2012, 08:49:08 pm

check out the store button in the red bar that will get you to the pcb's that are available

Title: Re: PCB's
Post by: rrowan on October 14, 2012, 08:54:12 pm

You are not allowed to view links. Register or Login

check out the store button in the red bar that will get you to the pcb's that are available

The store is only for Lynx hardware (i.e.: RJ's pcbs)

I would pm N1ist to see if he has any boards. If he does than you can use the wiki like to order the parts from mouser.

Rick R.

Title: Re: PCB's
Post by: n1ist on October 15, 2012, 08:04:41 am

I'll see if I have any at home; otherwise, I can toss an order for a few boards in when I order the pixelnet splitters.
/mike

Title: Re: PCB's
Post by: keithr on October 20, 2012, 03:07:57 am

Thank you that would be great....

Title: Re: PCB's
Post by: holland lights on October 20, 2012, 10:38:56 am

I have one of the ver 1 boards. JUst needs the resistors soldered into place in the correct spot to work.

Title: Re: PCB's
Post by: n1ist on October 20, 2012, 08:34:47 pm

I have 4 version 1 boards.
/mike

Title: Re: PCB's
Post by: devoidelk on October 21, 2012, 02:36:23 pm

Are they going to have a coop for this sometime nxt yr?