Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - rrawlings

Pages: [1] 2 3 ... 9
1
Lynx EtherDongle / Re: I Know, I know, not another "my etherdongle won't program" thread
« on: December 07, 2015, 06:52:43 pm »
I can assure those who are willing to help that it is assembled correctly, having managed an electronic manufacturing company for nearly 20 years. I am hoping someone else has encountered this same error.

2
Lynx EtherDongle / I Know, I know, not another "my etherdongle won't program" thread
« on: December 07, 2015, 05:39:12 pm »
I have my completed etherdongle that I finally built from the 1st co-op. I sourced the correct 49.9ohm resistors and assembled. I am coming up with an error upon trying to program. I am getting the message "Ensure proper capacitance on VDDCORE/VCAP pin. This is pin 85 on the PIC chip. I have checked the capacitors and have the correct 0.1 uf and 10.0 uf capacitors from ground to pin 85. Am I missing some big thing here or is there a chance that I have a damaged PIC chip?  any help would be appreciated.

3
Sale/Trade / 800 pixel RGB mega tree complete for sale
« on: November 23, 2015, 05:47:51 pm »
A friend was very enthused about this and has had some things come up. One full setup using the new HolidayCoro tree topper and strip mounting. He paid $440 will take a $420. 16 strings of 50 pixels each, the top and bottom tree kit and all of the mounting strips including strain reliefs for the bottom of the strings. All are brand new still sitting in the box from Holiday Coro

4
Vixen / Re: what controler would we use for Vixen 3.2?
« on: November 13, 2015, 12:58:04 pm »
What do we use for a USB dongle programmed for pixelnet?

5
Sale/Trade / Re: FS: Zeus 16 V2, Hubs, SSC, USB Dongle
« on: November 06, 2015, 07:24:10 pm »
Payment sent for active hub, power supply, 8 SSCs, and dongle. Thanks so much

6
Sale/Trade / Re: FS- Lynx USB Dongle PCB's
« on: December 22, 2014, 10:25:07 am »
I will take the V2, give me a price for a regular envelope or padded envelope. I would like to build one up as backup. That was my biggest fear going into this years show was that the one part I didn't have a backup of would die. One more week and I am in the clear.

7
Lynx USB DMX Dongle / Re: Windows XP help
« on: November 21, 2014, 10:39:31 am »
Yes he has. He has successfully gotten the drivers set up onto his laptop with windows 7, but he will not be able to dedicate that one to the show as it goes to classes with him each day. The link for the drivers is dead and we are having troubles with the FTDI driver install for the earlier windows systems

8
Lynx USB DMX Dongle / Windows XP help
« on: November 21, 2014, 09:37:09 am »
Please toss me a life preserver. We are hoping to use an older XP system kicking around the house to run our show. I am up against a time crunch as I am leaving the country on business for 2 weeks. My college age son has tried to get the drivers onto the computer to operate the dongle with no success. I hope to have it running by no later than Saturday night. We are doing a lights only display this first year since I was too slow getting an FM transmitter. Any help would be greatly appreciated. Time got away from me

9
Sale/Trade / Re: FS: SSC v3 units (price lowered)
« on: October 21, 2014, 01:36:50 am »
Pm sent

10
Finished COOPS / Re: Dumb String Controller Coop ( Open For Orders)
« on: July 31, 2014, 11:40:59 am »
Please cancel my request for 5. Things have changed and I need to cancel. Thanks for running this co-op though. Maybe next go around I can catch some

11
Finished COOPS / Re: Dumb String Controller Coop ( Open For Orders)
« on: July 24, 2014, 05:48:07 pm »
5x #1 and 5x #3 please

12
The Porch / Re: Corporate gifts
« on: December 17, 2013, 12:36:05 pm »
The sequence was all done in the C code prior to compiling and loading the hex file into the PIC. Unfortunately they were a little spendy to build. Nobody wants to pay what they cost to make.  If I load our labor into them we are at about $45 each. Done as a labor of love on a small scale to give to our suppliers and customers. We figured it would be remembered longer than a box of chocolates a bottle of wine

13
The Porch / Corporate gifts
« on: December 17, 2013, 11:59:54 am »
This year we decided to build our own.  small pic chip with the program. 5 channels and a star on top.
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
Sorry about the rotation on the last picture, no matter what I do it is right in Photobucket but comes out that way

14
Finished COOPS / Re: Zeus Coop - Closed for Orders
« on: November 06, 2013, 11:47:10 pm »
you can move us to the bottom also. No need for this years show. I will have to wait for after christmas to order my flex strips anyway.

15
Finished COOPS / Re: Zeus Coop - Open for Orders
« on: September 13, 2013, 10:44:28 am »
one kit of #1 please  >.d9

Pages: [1] 2 3 ... 9