1
Sale/Trade / Microchip Pickit 3
« on: May 17, 2020, 07:45:07 am »
$10 + shipping ($8.30 small USPS flat rate box - could reduce and send in padded envelope if ok)
(extra cable)
(extra cable)
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Sale/Trade / Bobcat DMX Servo Controller
« on: May 17, 2020, 07:39:44 am »
Never used, been collecting dust.
$15 + shipping ($8.30 USPS flat rate small box)
$15 + shipping ($8.30 USPS flat rate small box)
3
Sale/Trade / Lynx Etherdongle, 2 Falcon Pi Pixelnet/DMX controllers, some uAmp boards
« on: May 17, 2020, 07:38:15 am »
$20 + shipping (box is 8.5"x10"x2.25")
4
Sale/Trade / <sold> Active and Passive hubs
« on: December 22, 2016, 02:34:59 pm »
I have both built and unbuilt active hubs.
1. (Qty 2) Unbuilt 16 Port Active Hub: $15 + shipping
2. (Qty 1) Unbuilt 16 Port Passive Hub: $10 + shipping
3. (Qty 2) Built Active Hubs: $25 ea + shipping (will have corrosion X spray on them). Will remove from the battery box for easier shipping, and add 750W power supply
I can send pics, if wanted.
1. (Qty 2) Unbuilt 16 Port Active Hub: $15 + shipping
2. (Qty 1) Unbuilt 16 Port Passive Hub: $10 + shipping
3. (Qty 2) Built Active Hubs: $25 ea + shipping (will have corrosion X spray on them). Will remove from the battery box for easier shipping, and add 750W power supply
I can send pics, if wanted.
5
Sale/Trade / <sold> Active and Passive Hubs, computer PS
« on: November 03, 2016, 08:43:22 am »
I have both built and unbuilt active hubs.
1. (Qty 2) Unbuilt 16 Port Active Hub: $15ea + shipping (includes all parts, just not assembled)
2. (Qty 1) Unbuilt 16 Port Passive Hub: $10ea+ shipping (includes all parts, just not assembled)
3. (Qty 2) Built Active Hubs: $15 ea (will have corrosion X spray on them). Will remove from the battery box for easier shipping
4. (Qty 2) 750W power supply $30 ea
You are not allowed to view links. Register or Login
1. (Qty 2) Unbuilt 16 Port Active Hub: $15ea + shipping (includes all parts, just not assembled)
2. (Qty 1) Unbuilt 16 Port Passive Hub: $10ea+ shipping (includes all parts, just not assembled)
3. (Qty 2) Built Active Hubs: $15 ea (will have corrosion X spray on them). Will remove from the battery box for easier shipping
4. (Qty 2) 750W power supply $30 ea
You are not allowed to view links. Register or Login
6
Sale/Trade / Re: Multiple FS items
« on: December 09, 2015, 11:30:04 am »
I thought i sent this out last night, but dont see my email. I do still have it, and could ship it out tomorrow. $10 woukd be for the dongle and shipping.
If you are interested, paypal account is lorajoslyn@gmail.com.
Thanks!
Sent from my SM-G900V using Tapatalk
If you are interested, paypal account is lorajoslyn@gmail.com.
Thanks!
Do you still have the DMX dongle PCBs? I'm waiting on a PM back.
Sent from my SM-G900V using Tapatalk
7
Sale/Trade / Re: Multiple FS items
« on: December 03, 2015, 07:24:55 am »
Ill look tonight, but thought this was up to date.
8
Sale/Trade / Multiple FS items
« on: August 15, 2015, 10:01:10 am »
I have the following items for sale:
Etherdongle with case, conductor - $100+shipping/paypal fees
Etherdongle with conductor, case, CF card - $110+shipping/paypal fees
1 Zeus 16 board, assembled, not used $40 ea+shipping/paypal fees
1 Zeus 8 board, assembled - $30+shipping/paypal fees
2 Lynx DMX dongle boards only $5+shipping/paypal fees
1 Lynx trigger bcp and parts, in bags from coop - $20+shipping/paypal fees
2 Lynx Express kits (V5.1) not assembled - $45 ea+shipping/paypal fees
2 Lynx DMX dongle boards only $5+shipping/paypal fees
1 Lynx trigger bcp and parts, in bags from coop - $20+shipping/paypal fees
9
Finished COOPS / Re: Active/Passive/4Port HUB Coop
« on: April 12, 2015, 11:53:13 am »
Kit 1 - 2
Kit 3 - 3
Thank you!
Kit 3 - 3
Thank you!
10
Sale/Trade / Re: FS - ETD, Conductor, Slave, and trigger
« on: April 22, 2014, 07:06:41 pm »
Jim, I'll take them off your hands! 
11
Lynx Smart String / Re: Hub (?) Problems - Help with Troubleshooting appreciated! *SOLVED*
« on: December 22, 2013, 09:56:14 pm »
Just figured out the problem. No hub issues, no etherdongle issues...
Just contractor isssues, ha! I have a contractor adding a gas line for a furnace in our garage. They must have accidentally hit one of the in-line connections I had. Unplugged and re-plugged the pass-through connector and VOILA! Working arches! Yay!
Just contractor isssues, ha! I have a contractor adding a gas line for a furnace in our garage. They must have accidentally hit one of the in-line connections I had. Unplugged and re-plugged the pass-through connector and VOILA! Working arches! Yay!
12
Lynx Smart String / Re: Hub (?) Problems - Help with Troubleshooting appreciated!
« on: December 22, 2013, 08:05:05 pm »
I have each hub on its own universe, with the first 100 channels reserved for DMX. Though don't have any dmx signals on Hub 3 or 4.
13
Lynx Smart String / Re: Hub (?) Problems - Help with Troubleshooting appreciated!
« on: December 22, 2013, 07:54:16 pm »
Hubs 1-3 are active, 4 is passive (all 16 port)
Using DMX off Hubs 1&2, without problems
I did swap around hubs (see description below).
Using DMX off Hubs 1&2, without problems
I did swap around hubs (see description below).
14
Lynx Smart String / Hub (?) Problems - Help with Troubleshooting appreciated! *SOLVED*
« on: December 22, 2013, 07:46:17 pm »
I'm struggling with outputs from 1 hub within my display. Receives some signals, but generally not responsive. Everything was working well until we had an ice storm come through. No water in the boxes, and the smart string pipes were dry for the elements attached.
My display:
Hub 1 & 2 - Runs mega tree
Hub 3 - runs windows and arches
Hub 4 - runs dumb strings
Cat 5 runs Etherdongle--> Hub 1 --> Hub 2 --> Hub 3 --> Hub 4
Hub 3 is the one giving me problems. Note: Hub 4 seems to run without problems
Checked the cat 5 from Hub 2 - Hub 3 - good connection, but ran a new cable just in case - no change.
Swapped Hub 3 with Hub 4 (thinking there was something wrong with the hub) - no change
Swapped Hub 2 with Hub 4 (thinking that maybe the output connection might be bad) - no change
I'm running the same load as on Hub 1& 2, with the same power supplies (so shouldn't be overloaded)
I'm using the LSP scheduler to output lights.
I'm running out of ideas of what to check. Any thoughts?
My display:
Hub 1 & 2 - Runs mega tree
Hub 3 - runs windows and arches
Hub 4 - runs dumb strings
Cat 5 runs Etherdongle--> Hub 1 --> Hub 2 --> Hub 3 --> Hub 4
Hub 3 is the one giving me problems. Note: Hub 4 seems to run without problems
Checked the cat 5 from Hub 2 - Hub 3 - good connection, but ran a new cable just in case - no change.
Swapped Hub 3 with Hub 4 (thinking there was something wrong with the hub) - no change
Swapped Hub 2 with Hub 4 (thinking that maybe the output connection might be bad) - no change
I'm running the same load as on Hub 1& 2, with the same power supplies (so shouldn't be overloaded)
I'm using the LSP scheduler to output lights.
I'm running out of ideas of what to check. Any thoughts?
15
The Porch / Re: "Your husband is a dumb***"
« on: December 08, 2013, 11:20:36 am »
You're definitely in good (?) company, though this was the "your wife is a dumb a$$... " moment. I did the same with my hub as MrChristmas did - left the @$^(*& lid off the hub overnight, in a foggy rain - lovely. After explaining the situation to my husband (not fun), he proceeded to (repeatedly) explain to me the values of slowing down and performing thorough inspections...
Dried it out for a day, re-plugged everything, and NOTHING. Replaced those 485 chips, and NOTHING again. At least it was consistent! Well, I deemed it a failure on my behalf, and went back to fixing other problems in my display. And what do I see a few days later, but my tree (hub controlling dumb strings on a tree in the yard) alive and blinking with the rest of the display!
Talk about a happy dance there!
Dried it out for a day, re-plugged everything, and NOTHING. Replaced those 485 chips, and NOTHING again. At least it was consistent! Well, I deemed it a failure on my behalf, and went back to fixing other problems in my display. And what do I see a few days later, but my tree (hub controlling dumb strings on a tree in the yard) alive and blinking with the rest of the display!
Talk about a happy dance there!