Author Topic: PCB's (Read 4863 times)

keithr · « **on:** October 14, 2012, 03:03:32 am »

Is it possible to get a PCB and order parts?

sabie · « **Reply #1 on:** October 14, 2012, 08:49:08 pm »

check out the store button in the red bar that will get you to the pcb's that are available

rrowan · « **Reply #2 on:** October 14, 2012, 08:54:12 pm »

You are not allowed to view links. Register or Login

check out the store button in the red bar that will get you to the pcb's that are available

The store is only for Lynx hardware (i.e.: RJ's pcbs)

I would pm N1ist to see if he has any boards. If he does than you can use the wiki like to order the parts from mouser.

Rick R.

n1ist · « **Reply #3 on:** October 15, 2012, 08:04:41 am »

I'll see if I have any at home; otherwise, I can toss an order for a few boards in when I order the pixelnet splitters.
/mike

keithr · « **Reply #4 on:** October 20, 2012, 03:07:57 am »

Thank you that would be great....

holland lights · « **Reply #5 on:** October 20, 2012, 10:38:56 am »

I have one of the ver 1 boards. JUst needs the resistors soldered into place in the correct spot to work.

n1ist · « **Reply #6 on:** October 20, 2012, 08:34:47 pm »

I have 4 version 1 boards.
/mike

devoidelk · « **Reply #7 on:** October 21, 2012, 02:36:23 pm »

Are they going to have a coop for this sometime nxt yr?

DiyLightAnimation

News:

Author Topic: PCB's (Read 4863 times)

keithr

PCB's

sabie

Re: PCB's

rrowan

Re: PCB's

n1ist

Re: PCB's

keithr

Re: PCB's

holland lights

Re: PCB's

n1ist

Re: PCB's

devoidelk

Re: PCB's