Editing Light-O-Rama Controllers

==Helpful links to Use LOR equipment with DLA==

* [[General Information on Dongle Connections]]; This includes information on the Enttec Pro, iDMX, and Lynx dongles

* [[Light-O-Rama iDMX Connections]]

* [http://diylightanimation.com/wiki/images/c/cd/Lor2Vix.zip Light-O-Rama v2 to Vixen sequence converter.]; written by aERonAUtical96 (Rob)

* [http://www.lightorama.com/Documents/DMX-DOC.pdf DMX-DOC.pdf]; Light-O-Rama document showing firmware versions required for DMX operation

* [http://www.lightorama.com/support.html Light-O-Rama Support]; Light-O-Rama downloads

* LOR controllers need to be updated to firmware v4.20 or higher to work in a DMX environment.

* The only supported way to update the firmware in the LOR controllers is to use the LOR utility.  This requires a valid licensed copy of of the Light-O-Rama sequencing software.

*Adapter [http://www.productionadvantageonline.com/Control-Adapters-Terminators/XLRJ45-3M.aspx XLR 3-Pin Male to RJ45] from Production Advantage website

==Lynx Dongle to LOR 568b and possible D-light cable pinout==
[[Image:RJ45-Pinout.jpg]]

{|cellpadding="8" cellspacing="0"
|DMX Dongle
|LOR
|Signal
|-
|WHT/OR  (1)
|Blue (4)  
|D+(A)
|-
|Orange (2)
|WHT/Blue (5)
|D-(B)
|-
|BRN/WHT (7)
|GRN (6)
|D1 Ret(Gnd)
|}

thanks to Joneslights/Ampfan2 for the information & corrections.

==Sample cable to connect dongle==
This is a simple dongle to convert and crossover the blue and orange cable pairs.

It is just a RJ45 keystone jack on one end and TIA-568B plug on the other end.

[[Image:Lynx to LOR converter.jpg|400px]]

==Sample cable XLR to RJ-45==
[[Image:DLA-RJ45-wiring.jpg|600px|Thumb Drawing by tpctech]]
*[[Media:Dla-rj45-wiring.pdf]] Drawing created by Tpctech

==Possible Diagram==
Sample drawing of the Lynx Wireless system with a LOR controller
[[Image:Wireless-Lynx-Lor.jpg|left|thumb|400px]]






[[Category:Help|{{PAGENAME}}]]
[[Category:LOR]]