Template:Set Address
From Holiday Controller
To program the Lynx Controller/Dimmer.
Step 1 - Turn off power to controller and move jumper to program mode
Step 2 - Run RJ's Lynx Address Program and select address you need. Click on Program button
Step 3 - Turn on controller and count to 5
Step 4 - Turn off controller and move jumper back to operation mode
Step 5 - Click Stop on the Lynx Address Program
Step 6 - Turn on controller and use your selected program to see if controller is now on the correct start address.
Either exit Lynx Addrress Program or go back to step 1 to program another controller
