Sequence builder

[golights]

I can't seem to get the builder to look for my sd card. It will only let me select drive c.  I have the card in a card reader plugged into a usb port.

[TexasStingray]

Does windows explorer see ?

[golights]

yes,

[TexasStingray]

that is really strange. I know that it only reads the drives when the application first launches. So, if you insert it after words it will not refresh.

Scott

[Steve Gase]

what capacity SD card?  ...and does your SD reader/writer handle that capacity?
I've got some older devices that don't support the newer SDHC cards.

[golights]

Thanks all for your replys and suggestions.  It was a mistake on my part.  I was not using a sd card but a compact flash.  It sees my sd card. I guess I have way to many pieces to this puzzle I call fun.   Looking forward to receiving the Panther and putting it to work. 

Ken

[arw01]

Glad you found your issue was simple.

Sometimes with multiple sd cards and readers one has to go into the disk manager and tell windows to change the drive letters.

Alan

[StanB]

I'm having the same issue.  I have the SD card plugged into a new Targus reader that Explorer lists as drive E:.  When I start the sequence builder, it only allows me to select drive C:.  Dell Inspiron 15 running Windows 8.

[arw01]

Can you post up a screen capture of the right click properties of the sd card from the explorer tree?

[TexasStingray]

I think I found the issue, when I get home in a few hours I'll fix it and repost a new file.

[TexasStingray]

Ok, there is a new installer up there and if you just want the files here they are in a zip file. I think you can just replace the exist files. Please let me know how this works.

You are not allowed to view links. Register or Login

Scott

[StanB]

It's working now.  Thanks!