Author Topic: cat 5 solder points (Read 1975 times)

bassmants · « **on:** November 15, 2013, 04:50:09 pm »

Is there and In or Out or does it matter?

duane.mosley · « **Reply #1 on:** November 15, 2013, 06:57:22 pm »

I would think no. I just built mine the other night and tested both to check it and it worked both ways. Seems to be just like a splitter

Steve Gase · « **Reply #2 on:** November 15, 2013, 11:07:54 pm »

Either point can act as input or output. You are better off connecting each pigtail directly to the board and "keeping the stub" short.

An excellent discussion on Dmx by David Moore;

You are not allowed to view links. Register or Login

zwiller · « **Reply #3 on:** November 16, 2013, 10:22:24 am »

Might want to clarify in the manual?

Steve Gase · « **Reply #4 on:** November 16, 2013, 06:52:39 pm »

You are not allowed to view links. Register or Login

Might want to clarify in the manual?

As Rick points out, we are all "free to update the manuals" it shouldn't be one person with this responsibility.

I'll make this change.

zwiller · « **Reply #5 on:** November 17, 2013, 08:08:33 am »

Me no understand hypertext protocol.

Thanks for the update.

bassmants · « **Reply #6 on:** November 17, 2013, 03:05:11 pm »

Thanks for updating the wiki and clarification.

DiyLightAnimation

News:

Author Topic: cat 5 solder points (Read 1975 times)

bassmants

cat 5 solder points

duane.mosley

Re: cat 5 solder points

Steve Gase

Re: cat 5 solder points

zwiller

Re: cat 5 solder points

Steve Gase

Re: cat 5 solder points

zwiller

Re: cat 5 solder points

bassmants

Re: cat 5 solder points