Author Topic: Easy 27CH DMX512 dimmer Controller question (Read 771 times)

salongaopm · « **on:** October 29, 2014, 05:47:34 am »

Has anyone tried this 27 channel controller? I am wondering if this is okay to use for dumb rgb 5050 fles strip.

You are not allowed to view links. Register or Login

twooly · « **Reply #1 on:** October 29, 2014, 06:20:54 am »

Yep I've got a couple and they work great.

Steve Gase · « **Reply #2 on:** October 29, 2014, 11:01:45 am »

How are the RJ45 jacks used? if DMX, is the pinout described? assuming pin1=orange/white=DMX+ and pin2=orange=DMX-

salongaopm · « **Reply #3 on:** October 29, 2014, 06:59:09 pm »

can I just connect it to an le via rj45, set the start channel and done? also, can I use a pc power supply to power it? how?

twooly · « **Reply #4 on:** October 29, 2014, 09:18:03 pm »

I didn't have the rj45 on mine but I soldered the Orange/orange white on two pins on the board. I'm guessing it probably uses those but never hurts to ask

DiyLightAnimation

News:

Author Topic: Easy 27CH DMX512 dimmer Controller question (Read 771 times)

salongaopm

Easy 27CH DMX512 dimmer Controller question

twooly

Re: Easy 27CH DMX512 dimmer Controller question

Steve Gase

Re: Easy 27CH DMX512 dimmer Controller question

salongaopm

Re: Easy 27CH DMX512 dimmer Controller question

twooly

Re: Easy 27CH DMX512 dimmer Controller question