How many people need EtherDongles?

[sittinguphigh]

If the conductor is coming out and I need a etherdongle to run it.

I will need one I think

Only running maybe 2 to 4 smart strings. At the most.

[D56VillageNut]

If there is still time or EtherDongle units available I'd be interested in at least one (1).

Thanks

Alan T

[kevinpickett]

I would say there is more than enough for a good size coop.  Lets get one started soon.   <pop..

[dearvbguru]

I need +1 minimum, ideally 2 for this year

[t0cableguy]

I need one as I am starting from scratch.

[remixsam]

I would like 1 please

[duane.mosley]

i need one. i am starting from scratch


duane

[davron12]

I definitely need at least 1. Would like 2.

[urthegman]

Mort, It depends on your set up. If you use DMX firmware on the DMX dongle you will get 512 DMX channels out. If you use Pixelnet firmware on the DMX dongle and insert an Active SS Hub to your set up, you will get 4096 Pixelnet channels out which you could use on your SSC's (You said you have 2-4 SSC's so you would only need approximately 520 channels). At the same time you could get 512 DMX channels off of the same Active Hub by using DMX out on the Hub. Moderators, please feel free to move this, as I do not want this thread to go off track. Hope this helps, George

[Mike Hill]

I got asked alot at the academy about the next etd coop. How many people need them? I have the ones that I did not pass on inspection when I did them for us and will need to rework them myself to post as I have a chuck of money tied up in them. I am wondering if I get them done is that enough or are we in need of working on a new coop and the work I need to do to get that lined up. (Chips put on for us)

Post if you are waiting so I can get an idea of what I need to be doing.

RJ

RJ,

Can you give a possible timeframe for when the next EtherDongle coop/PCB's might go in to affect?  Anxious guy over here.

Thanks,
Mike Hill

[bajadahl]

I am also going to want 2.  Now just watching for the Coop to start.

Alan

[RJ]

In the works.

Sent from my Charge by Tapatalk

RJ

[ms5435]

I have one but it still has not worked. The lights on the MagJack wont light up. I would like to build another one to use as a refrence.

[tbone321]

Did you install the firmware on the board.  Until you do the MagJack lights will NOT light up.

[John2571]

In need of 1 for this year.